****first take the image in USB drive and insert USB drive to your desktop and mount the USB image onto the VM HOSt and follow the below steps exactly you can install.


****NetApp ONTAP simulator installation steps******


sriram@sriram-desktop:~$ cd /media
sriram@sriram-desktop:/media$ cd NAVEEN
sriram@sriram-desktop:/media/NAVEEN$ cd 7.2.4-sim-cdrom-image-v22
sriram@sriram-desktop:/media/NAVEEN/7.2.4-sim-cdrom-image-v22$ ./setup.sh

Script version 22 (18/Sep/2007)
This script can only be ran as root. Attempting to re-run using sudo.

Script version 22 (18/Sep/2007)
Ignore defaults file set
Where to install to? [/sim]: /sim7.2
Would you like to install as a cluster? [no]:
Would you like full HTML/PDF FilerView documentation to be installed [yes]:
Continue with installation? [no]: yes
Creating /sim7.2
Unpacking sim.tgz to /sim7.2

Configured the simulators mac address to be [00:50:56:c:af:72]
Please ensure the simulator is not running.
Your simulator has 3 disk(s). How many more would you like to add? [0]: 17

The following disk types are available in MB:
Real (Usable)
a - 43 ( 14)
b - 62 ( 30)
c - 78 ( 45)
d - 129 ( 90)
e - 535 (450)
f - 1024 (900)

If you are unsure choose the default option a
What disk size would you like to use? [a]: d
Disk adapter to put disks on? [0]:
Use DHCP on first boot? [yes]:
Ask for floppy boot? [no]:
Checking the default route...
You have a single network interface called eth0 (default route) . You will not be able to access the simulator from this Linux host. If this interface is marked DOWN in ifconfig then your simulator will crash.
Which network interface should the simulator use? [default]:
Your system has 334MB of free memory. The smallest simulator memory you should choose is 110MB. The maximum simulator memory is 294MB.
The recommended memory is 128MB.
How much memory would you like the simulator to use? [128]: 256
Create a new log for each session? [no]:
Overwrite the single log each time? [yes]:
Adding 17 additional disk(s).
Complete. Run /sim7.2/runsim.sh to start the simulator.
sriram@sriram-desktop:/media/NAVEEN/7.2.4-sim-cdrom-image-v22$
sriram@sriram-desktop:/media/NAVEEN/7.2.4-sim-cdrom-image-v22$ /sim7.2/runsim.sh
This script can only be ran as root. Attempting to re-run using sudo.
runsim.sh script version Script version 22 (18/Sep/2007)
This session is logged in /sim7.2/sessionlogs/log

NetApp Release 7.2.4: Thu Nov 15 23:05:40 PST 2007
Copyright (c) 1992-2007 Network Appliance, Inc.
Starting boot on Tue Dec 16 16:46:57 GMT 2008
Tue Dec 16 16:47:09 GMT [fmmbx_instanceWorke:info]: normal mailbox instance on local side
Tue Dec 16 16:47:09 GMT [fmmb.current.lock.disk:info]: Disk v4.16 is a local HA mailbox disk.
Tue Dec 16 16:47:11 GMT [raid.cksum.replay.summary:info]: Replayed 0 checksum blocks.
Tue Dec 16 16:47:11 GMT [raid.stripe.replay.summary:info]: Replayed 0 stripes.
Tue Dec 16 16:47:14 GMT [vol.language.unspecified:info]: Language not set on volume vol0. Using language config "C". Use vol lang to set language.
Tue Dec 16 16:47:14 GMT [rc:notice]: The system was down for 30056623 seconds
/etc/rc is missing. Running configuration dialog.

Configuring onboard ethernet ns0.
Contacting DHCP server.
Ctrl-X to skip DHCP search ...
Tue Dec 16 16:47:25 GMT [rc:info]: Contacting DHCP server
Configuring ns0 using IP 192.168.159.134 netmask 255.255.255.0.
ifconfig ns0 up netmask 255.255.255.0 192.168.159.134
add net default: gateway 192.168.159.2
Tue Dec 16 16:47:34 GMT [rc:info]: DHCP config successful
NetApp Release 7.2.4: Thu Nov 15 23:05:40 PST 2007
System ID: 0099909261 ()
System Serial Number: 987654-32-0 ()
Model Name: Simulator
Processors: 1
slot 0: NetApp Virtual SCSI Host Adapter v0
20 Disks: 2.4GB
2 shelves with LRC
slot 1: NetApp Virtual SCSI Host Adapter v1
slot 2: NetApp Virtual SCSI Host Adapter v2
slot 3: NetApp Virtual SCSI Host Adapter v3
slot 4: NetApp Virtual SCSI Host Adapter v4
20 Disks: 2.4GB
2 shelves with LRC
slot 5: NetApp Virtual SCSI Host Adapter v5
slot 6: NetApp Virtual SCSI Host Adapter v6
slot 7: NetApp Virtual SCSI Host Adapter v7
slot 8: NetApp Virtual SCSI Host Adapter v8
4 Tapes: VT-100MB
VT-100MB
VT-100MB
VT-100MB
Please enter the new hostname []: sriram
Do you want to configure virtual network interfaces? [n]:
Please enter the IP address for Network Interface ns0 [192.168.159.134]:
Please enter the netmask for Network Interface ns0 [255.255.255.0]:
Please enter the IP address for Network Interface ns1 []:
Would you like to continue setup through the web interface? [n]: yes
executing: ifconfig ns0 192.168.159.134

Point a web browser to
http://sriram/api
or
http://192.168.159.134/api
to complete setup. At any time, you can continue with the console setup.

Please enter the name or IP address of the default gateway [192.168.159.2]:
The administration host is given root access to the filer's
/etc files for system administration. To allow /etc root access
to all NFS clients enter RETURN below.
Please enter the name or IP address of the administration host:
Please enter timezone [GMT]: EST
Where is the filer located? []:
What language will be used for multi-protocol files (Type ? for list)?:
language not set
Do you want to run DNS resolver? [n]:
Do you want to run NIS client? [n]:
Setting the administrative (root) password for sriram ...
The initial aggregate currently contains 3 disks; you may add more
disks to it later using the "aggr add" command.
New password:
Retype new password:
Tue Dec 16 11:49:10 EST [passwd.changed:info]: passwd for user 'root' changed.
Tue Dec 16 11:49:11 EST [dfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk drives
Tue Dec 16 11:49:11 EST [sfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk shelves.
Tue Dec 16 11:49:11 EST [tapemc.alias.addOK:info]: Alias st0 automatically added for tape device WWN[0:042:424200:000000].
Tue Dec 16 11:49:11 EST [tapemc.alias.addOK:info]: Alias st1 automatically added for tape device WWN[0:142:424200:000000].
Tue Dec 16 11:49:11 EST [tapemc.alias.addOK:info]: Alias st2 automatically added for tape device WWN[0:242:424200:000000].
Tue Dec 16 11:49:11 EST [tapemc.alias.addOK:info]: Alias st3 automatically added for tape device WWN[0:342:424200:000000].
add net default: gateway 192.168.159.2: entry already exists
There are 17 spare disks; you may want to use the vol or aggr command
to create new volumes or aggregates or add disks to the existing aggregate.
Tue Dec 16 11:49:12 EST [rc:info]: Registry is being upgraded to improve storing of local changes.
Tue Dec 16 11:49:12 EST [rc:info]: Registry upgrade successful.
Tue Dec 16 11:49:13 EST [mgr.boot.disk_done:info]: NetApp Release 7.2.4 boot complete. Last disk update written at Thu Jan 3 14:43:29 EST 2008
Tue Dec 16 11:49:13 EST [mgr.boot.reason_ok:notice]: System rebooted after a halt command.
This process will enable CIFS access to the filer from a Windows(R) system.
Use "?" for help at any prompt and Ctrl-C to exit without committing changes.

Your filer is currently visible to all systems using WINS. The WINS
name server currently configured is: [ 192.168.159.2 ].

(1) Keep the current WINS configuration
(2) Change the current WINS name server address(es)
(3) Disable WINS

Selection (1-3)? [1]:
A filer can be configured for multiprotocol access, or as an NTFS-only
filer. Since multiple protocols are currently licensed on this filer,
we recommend that you configure this filer as a multiprotocol filer

(1) Multiprotocol filer
(2) NTFS-only filer

Selection (1-2)? [1]:
CIFS requires local /etc/passwd and /etc/group files and default files
will be created. The default passwd file contains entries for 'root',
'pcuser', and 'nobody'.
Enter the password for the root user []:
Retype the password:
The default name for this CIFS server is 'SRIRAM'.
Would you like to change this name? [n]:
Data ONTAP CIFS services support four styles of user authentication.
Choose the one from the list below that best suits your situation.

(1) Active Directory domain authentication (Active Directory domains only)
(2) Windows NT 4 domain authentication (Windows NT or Active Directory domains)
(3) Windows Workgroup authentication using the filer's local user accounts
(4) /etc/passwd and/or NIS/LDAP authentication

Selection (1-4)? [1]: 4
What is the name of the Workgroup? [WORKGROUP]:
CIFS - Starting SMB protocol...
Welcome to the WORKGROUP Windows(R) workgroup

CIFS local server is running.


Password:
sriram> Tue Dec 16 11:50:15 EST [console_login_mgr:info]: root logged in from console

sriram> aggr status -s

Spare disks

RAID Disk	Device	HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
---------	------	------------- ---- ---- ---- ----- -------------- --------------
Spare disks for zoned checksum traditional volumes or aggregates only
spare v4.19	v4 1 3 FC:B - FCAL N/A 120/246784 127/261248
spare v4.20	v4 1 4 FC:B - FCAL N/A 120/246784 127/261248
spare v4.21	v4 1 5 FC:B - FCAL N/A 120/246784 127/261248
spare v4.22	v4 1 6 FC:B - FCAL N/A 120/246784 127/261248
spare v4.24	v4 1 8 FC:B - FCAL N/A 120/246784 127/261248
spare v4.25	v4 1 9 FC:B - FCAL N/A 120/246784 127/261248
spare v4.26	v4 1 10 FC:B - FCAL N/A 120/246784 127/261248
spare v4.27	v4 1 11 FC:B - FCAL N/A 120/246784 127/261248
spare v4.28	v4 1 12 FC:B - FCAL N/A 120/246784 127/261248
spare v4.29	v4 1 13 FC:B - FCAL N/A 120/246784 127/261248
spare v4.32	v4 2 0 FC:B - FCAL N/A 120/246784 127/261248
spare v4.33	v4 2 1 FC:B - FCAL N/A 120/246784 127/261248
spare v4.34	v4 2 2 FC:B - FCAL N/A 120/246784 127/261248
spare v4.35	v4 2 3 FC:B - FCAL N/A 120/246784 127/261248
spare v4.36	v4 2 4 FC:B - FCAL N/A 120/246784 127/261248
spare v4.37	v4 2 5 FC:B - FCAL N/A 120/246784 127/261248
spare v4.38	v4 2 6 FC:B - FCAL N/A 120/246784 127/261248
sriram> Tue Dec 16 11:50:39 EST [nbt.WINS.registrationFailed:error]: NBT: WINS server 192.168.159.2 did not respond when the filer attempted to register 192.168.159.134.
Tue Dec 16 11:50:39 EST [nbt.WINS.registrationTimeout:info]: NBT: No WINS server are responding. The filer will continue to try to register with WINS.