Active IQ and AutoSupport Discussions

BMC /RLM /SP port Status

saranraj456
8,177 Views

Hi Frnds,

Do we have any command to check the BMC /RLM /SP port Status , like whether the port is connected or not & up or not ?

Saran

6 REPLIES 6

HARI_KRISHNA981
8,177 Views

Hi Saran,

To Display RLM status --

rlm status [-v|-d]            

( The -v option displays verbose statistics and the -d option displays RLM debug information. )

To Display SP status --

sp status [-v|-d]            

( The -v option displays verbose statistics and the -d option displays sp debug log information. )

bmc status - Display the current status of the BMC.

Regards,
Hari

saranraj456
8,177 Views

No in BMC status there is no status of the port showing up or down , connected or not connected

HARI_KRISHNA981
8,177 Views

Hi Saran,

Look out other bmc commands using " bmc help ", you may find the appropriate one.

The BMC Stays operational regardless of the operating state of the storage system. Both the BMC and its dedicated Ethernet NIC use a standby voltage for high availability. The BMC is available as long as the storage system has input power to atleast one the storage system's power supplies

Regards,

Hari.

saranraj456
8,177 Views

Bmc status

Baseboard Management Controller:

Firmware Version: 1.1

IPMI version: 2.0

DHCP: off

BMC MAC address: 00:a0:97:0b:91:ce

IP address: 204.110.70.210

IP mask: 255.255.255.0

Gateway IP address: 204.110.70.2

BMC ARP interval: 10 seconds

BMC has (1) user: naroot

ASUP enabled: on

ASUP mailhost: 0.0.0.0

HARI_KRISHNA981
8,177 Views

are sp,rlm commands displaying the statuses exactly ??

saranraj456
8,177 Views

my need is completely different, i just want to know any cmd to check whether the cables are connected or not?

Saran

Public