2016-11-01 10:07 PM
Yes, a maximum of eight concurrent compression and deduplication processes is allowed on each node on an HA pair configuration. Refer page 53 http://www.netapp.com/us/media/tr-4476.pdf
2016-11-02 07:47 PM
On page 53
Refer section below:
HA Controller Configuration HA pair controller configurations are supported with both deduplication and compression. NetApp recommends that both nodes run the same version of Data ONTAP. Deduplication and compression run on each node independently. Writes to the FlexVol volume or data constituents have fingerprints written to the change log. During failover or giveback to the partner node, inline compression continues as normal and deduplication change logging continues to happen. Postprocess compression and deduplication processes start at the next scheduled time on the failed node after failover or giveback completes using the updated change log, or they can be started manually. A maximum of eight concurrent compression and deduplication processes is allowed on each node on an HA pair configuration. During failover, the surviving node continues to be limited to a maximum of eight concurrent compression and deduplication operations, even though deduplication continues for both nodes.
2016-11-03 10:51 AM
Thanks Sahana, I see it now. It doesn't explicitly address whether this applies on an AFF the same way it does on a FAS system. I ask because inline dedupe/compression are enabled by default on new volumes on AFF, and it made me wonder if requirements are dfiferent.
2016-11-03 08:30 PM
Nothing about deduplication in the comaparison of FAS and AFF. Refer https://library.netapp.com/ecmdocs/ECMP12466574/html/GUID-CBDB06C5-A073-43E0-9DAD-C1AC35BE216B.html