Subscribe

Question about input voltage for EF560

Does anyone know the input voltage range for the EF560 Flash Array or direct me to a document that contains it?  I looked through the available online documentation but could not find this information. The range for the EF550 is 100-240 VAC...but could not find it for the EF560. Thanks!

Re: Question about input voltage for EF560

Hi,

 

I hope this TR will help you understand the typical and maximum operating power and cooling.

http://www.netapp.com/us/media/tr-4371.pdf

Refer Page # 14

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

Re: Question about input voltage for EF560

If anybody has such a question, I suggest checking the hardware universe as the first step.

HWU is available here. http://hwu.netapp.com

Here is an example how you can get to the EF560 controller.

hwu.jpghwu2.jpg

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Cannot find the answer you need? No need to open a support case - just CHAT and we’ll handle it for you.