Subscribe

Autosupport:The system will drop the message

[ Edited ]

HI,

 

Im having an issue configuring autossupport when I try to test it prompted the system will drop the messages 

I also try to change the transport protocol to http/https and smtp but still I didnt received any autosupport email.

What configuration should we use for this to be enable send autosupport?

"AutoSupport message (HA Group Notification from PGA-StorageNSB (SYSTEM CONFIGURATION WARNING) WARNING) for host (0) was not posted to NetApp. The system will drop the message."

 

StorageNSB> options autosupport
autosupport.content complete (value might be overwritten in takeover)
autosupport.doit USER_TRIGGERED (testing)
autosupport.enable on (value might be overwritten in takeover)
autosupport.from clientemail.com (value might be overwritten in takeover)
autosupport.local_collection on (value might be overwritten in takeover)
autosupport.mailhost xxxxxxxxxxxxxx (value might be overwritten in takeover)
autosupport.max_http_size 10485760 (value might be overwritten in takeover)
autosupport.max_smtp_size 5242880 (value might be overwritten in takeover)
autosupport.minimal.subject.id systemid (value might be overwritten in takeover)
autosupport.nht_data.enable on (value might be overwritten in takeover)
autosupport.noteto support@aisc.com.ph (value might be overwritten in takeover)
autosupport.ondemand.polling_interval 60 (value might be overwritten in takeover)
autosupport.ondemand.remotediag.state on (value might be overwritten in takeover)
autosupport.ondemand.server_url https://support.netapp.com/aods/asupmessage (value might be overwritten in takeover)
autosupport.ondemand.state on (value might be overwritten in takeover)
autosupport.partner.to (value might be overwritten in takeover)
autosupport.payload_format 7z (value might be overwritten in takeover)
autosupport.performance_data.doit DONT
autosupport.performance_data.enable on (value might be overwritten in takeover)
autosupport.periodic.tx_window 1h (value might be overwritten in takeover)
autosupport.retry.count 15 (value might be overwritten in takeover)
autosupport.retry.interval 4m (value might be overwritten in takeover)
autosupport.support.enable on (value might be overwritten in takeover)
autosupport.support.proxy (value might be overwritten in takeover)
autosupport.support.put_url support.netapp.com/put/AsupPut (value might be overwritten in takeover)
autosupport.support.reminder on (value might be overwritten in takeover)
autosupport.support.to autosupport@netapp.com (value might be overwritten in takeover)
autosupport.support.transport smtp (value might be overwritten in takeover)
autosupport.support.url support.netapp.com/asupprod/post/1.0/postAsup (value might be overwritten in takeover)
autosupport.throttle on (value might be overwritten in takeover)
autosupport.to pgait@prudentialguarantee.com,jerome.diaz@aisc.com.ph (value might be overwritten in takeover)
autosupport.validate_digital_certificate on (value might be overwritten in takeover)


Thanks,

Jerome

Re: Autosupport:The system will drop the message

No configuration other than autosupport.mailhost and Mail recipients is needed. Please ask your mailhost admin to check whether the mail server rejects SMTP requests from your filer, or capture packets by pktt and look into it.

Re: Autosupport:The system will drop the message

Hi,

Thank you for that information.

what additional configuration should I look in the mail host?

Thanks

Re: Autosupport:The system will drop the message

It depends on your mail server. You should ask mail server admin to check logs and configurations. Or capture packets by pktt and provide it to mail admins.

Re: Autosupport:The system will drop the message

Hi Jerome,

 

Also, check the default gateway by issuing route –s or route –gsn. If the gateway is incorrect, fix it by issuing

route add net mailhost ip

 

Regards,
Aman