Subscribe

FC Host Adapter (Q Logic 2432 rev. 2)

Hi All,


Netapp 2020 filers installed with Fibre Channel Host Adapter 0a (Q-Logic 2432 rev. 2),we have two FC’s installed on it but we are using only one right now.

Planning to replace the unused FC HBA card to our new FAS 2240 filer, but question is is that above fc adapter can be used for new filer?


Can you confirm is it ok to swap the same FC to our new filer FAS 2240/4U?


Pleas advice.

Thanks,

Hajee Mohamed

Re: FC Host Adapter (Q Logic 2432 rev. 2)

Net020-filer> storage show adapter

Slot:            0a

Description:     Fibre Channel Host Adapter 0a (QLogic 2432 rev. 2)

Firmware Rev:    4.4.0

FC Node Name:    5:00a:098001:

FC Packet Size:  2048

Link Data Rate:  4 Gbit

SRAM Parity:     Yes

External GBIC:   No

State:           Enabled

In Use:          Yes

Redundant:       No

Slot:            0b

Description:     Fibre Channel Host Adapter 0b (QLogic 2432 rev. 2)

Firmware Rev:    4.4.0

FC Node Name:    5:00a:098101:

FC Packet Size:  2048

Link Data Rate:  1 Gbit

SRAM Parity:     Yes

External GBIC:   No

State:           Disabled

In Use:          No

Redundant:       Yes