Subscribe

HPUX and Snapdrive + SMO

I am having an issue with a basically a snap restore process initiated by SMO. Here are is the error message:

0001-199 Command error: Snapdrive could not import /dev/vgoerspdata1: Unable
to create volume group directory

--[ERROR] SMO-13032: Cannot perform operation: Backup Restore.  Root cause:
SMO-11005: Error restoring snapshot: FLOW-11019: Failure in
ExecuteRestoreSteps: SD-00070: Error with volume groups(s) restore:
SD-10016: Error executing snapdrive command "/usr/sbin/snapdrive snap
restore -vg vg1 -vg vg2 -snapname
smo_1_1_f_h_1_0f0679542d56e779012d56e781ad0001_0 -force
-noprompt": Starting to restore /dev/vg1, /dev/vg2
WARNING:  This can take several minutes.
           DO NOT CONTROL-C!
           If snap restore is interrupted, the filespecs
           being restored may have inconsistent or corrupted
           data.
For detailed progress information, see the log file
/var/snapdrive/sd-recovery.log
Importing vg1, vg2
Importing vg1, vg2
0001-199 Command error: Snapdrive could not import /dev/vg1: Unable
to create volume group directory

After talking this out, it seems that snapdrive is doing an extra step in the restore procedure that would normally have to execute if the volume group was not under Service Guard. We think that this extra step .... which is:

A   # vgchange -a -y  --- is not needed and thus fails during the restore process. This failure in the restore process kills the restore on the servers side. This is a snapdrive/Service Guard scripting issue. I need help!!

I would like to find out where on the system snapdrive builds its scripts from. If the script is a text file I should be able to edit the procedure, if its an executable I'm HOSED TOMMY !!! 

Any ideas would be appreciated.

Re: HPUX and Snapdrive + SMO

Unfortunately, I can't help you.  However, we are about to deploy SMO on HP-UX.  If would be very grateful if you could pass along any recommendations, gotcha's for SMO on HP-UX.

Thanks.

doug.clendening@chevron.com

Re: HPUX and Snapdrive + SMO

Doug,

I hope this helps:

Note:  If you have any Service Guard Clustering there are some manual things that you have to do to enable SMO to do its magic. I will not go into that unless you have a ServiceGuard Cluster environment.

If SG clustering is not your situation things should be easier -- ( I say won't straight forward)

A new database install is the best situation, so I'll start there.

1) Make sure your volumes are sized properly.

2) Make sure to brake your data base up into parts:

  1. Lun for CTRL files
  2. Lun for data files
  3. Lun for archive files
  4. Lun for temp files

Depending on what you choose for your space management software on your server:

1) LVM

2) A disk files system setup

These choices will determine what SMO has to do to take snapshots and restore the the database.

SMO can do either one its just in my experience, I have had to deal with ServiceGaurd Clustering which makes things a bit more complicated in terms of restoring luns to a previous backup in an LVM configuration. There are specific commands used for clustered filesystems when using HP LVM. This is my current issue I need to find out where SMO create the scripts to export and import VG's. Its seems now that SMO is building a script but to handle serviceGuard is missing an option in the command.

However if you do not have SG to deal with you should be fine. SMO works great! But you have to be sure you include the DBA in all discussions as they will be the ones using and having to really understand whats going on behind the scenes. 

I had to have multiple meetings to explain the snapshot technology with the database team. We also created a test database to allow the Database folks an opportunity to get used to the technology and eventually come to like it.

Thats all I got ...

Ask questions as you get them --- and hopefully I can help further.

HPUX and Snapdrive + SMO

Hi,

this problem was possibly caused by a too small volume! If you take a closer look at the filerlogs, you will see a message regarding 'vol autogrow failed'...

When you resize this volume, everything should work fine.

Best regards

Andreas