Subscribe
Accepted Solution

NetApp FAS2552 NetBackup 7.6 Direct Attached SAS Library

[ Edited ]

Morning All.

I am currently looking at implementing a HA FAS2552 and a direct dual path SAS attached HP Storever 2024.

I was hoping a gurn may know if the following is supported and will function as I am expecting.

 

The library will be dual pathed from the FAS2552 to the tape library via a single 6Gb SAS connection from each controller.

Backups will be driven by Symantec NetBackup 7.6.

 

All data will be served off Node one in the cluster running 8.3.2. In a failover scenario with a failover path configured in NetBackup for the other SAS connection will backups function using SVM-Scoped NDMP or Node scoped NDMP. I may even be looking into this a little too much, Also I must mention that the SVM is ISCSI providing LUNs to solaris hosts.

I am quite new to NetBackup and still attempting to get myself around it!

 

Thanks,

Luke

Re: NetApp FAS2552 NetBackup 7.6 Direct Attached SAS Library

Hi,

 

Please refer Data Protection Tape Backup and Recovery Guide. Refer Considerations when configuring multipath tape access on page 24.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.