Subscribe

SME error - Incomplete path or invalid location

[ Edited ]

Anyone seen this - we're getting this after running verification on a recent backup:

Error dialog box:

###

SnapManager for Exchange

Failed to get Exchange information for Server - SERVERNAME

Error Code: 0xC0040206

[SnapDrive Error]: Incomplete path or invalid location.

###

Exchange server is up, filer is up, SnapDrive service is running fine etc.

Please help!

Re: SME error - Incomplete path or invalid location

To add, also getting this initial dialog box when opening SME:

###

Failed to verify the Exchange server. Please make sure that Microsoft Exchange Server version 2003 or 2007 is installed in the Server.

###

Re: SME error - Incomplete path or invalid location

This sounds like a permissions issue. Before you get too far what is the version of SME, SnapDrive, DSM, Host Utilities, Exchange and Windows.

Check the permissions on the host system. Login as the user you installed SME with and make sure you can see all of your exchange storage groups. Along with this make sure you have the permissions as an admin for exchange.

Check to make sure your SME service is in the local admins account.

Let me know what you find.

-Rich

Re: SME error - Incomplete path or invalid location

Thx for the reply Rich!

My versions are:

SME 4.0

ONTAP 7.2

FAS270

1 system

1 head

2 shelves

Windows 2003 Server

Exchange 2003

I can log into Windows, open ESM fine and see all SGs, I can log into the filer as well.  The service account being used for SME is a local admin as well.

Anything else I can look at?

Re: SME error - Incomplete path or invalid location

To add, I've also tried disconnecting the Exchange server and reconnecting to the SME as well with the same results.

Re: SME error - Incomplete path or invalid location

More info, am getting the following in eventvwr:

SnapDrive warnings:

Event ID: 303
Filer does not have a live IP address.
Filer id: 'xxx.xx.xx.xxx+xxx.xxx.xx.xxx'
Filer host name: 'SERVERNAME'.

Re: SME error - Incomplete path or invalid location

SME requires that SnapDrive is healthy. What I mean by healthy is that SnapDrive needs to be able to communicate to the storage controller, the name resolution between SnapDrive and the storage controller is good (both forward and reverse name resolution is preferrable),

If SnapDrive cannot communicate with the storage controller to determine it's IP address, I suggest that you set the preferred storage system IP address in SnapDrive. This is very important for storage controllers with multiple network interfaces. Also, check the name resolution of the storage controller host name from the Windows host and the name resolution of the Windows host from the storage controller. Finally, check to see if the SnapDrive service account is in the local administrators group on both the Windows host and the Storage Controller.

Thanks,
Mark

Re: SME error - Incomplete path or invalid location

Thanks Mark - is this supposed to be blank?  See attached file...

Re: SME error - Incomplete path or invalid location

No, it should not be blank. You should put in the hostname of the storage controller and the IP address of the network interface of the storage controller. You can fill in the fields simply by clicking on them.

What version of SnapDrive are you using?

If you have established that you have good name resolution and you have verified that the SnapDrive service account is in the local administrators group on the WIndows host and the storage controller, you will also need to ensure that the RPC (or HTTP/HTTPS for SDW 5.0 and higher) communication is not being blocked by Windows firewall on the host.

You can either turn off Windows firewall or you can establish exceptions for the SnapDrive service (SWSvc.exe). This is covered in the SnapDrive product documentation.

One way to test to see if SnapDrive is able to communicate correctly with the storage controller is to create a small test LUN.

Thanks,
Mark

Re: SME error - Incomplete path or invalid location

Mark, putting in the filer name + IP didn't make a difference unfortunately.

SnapDrive version is 4.0.0.1273, FAS270, ONTAP 7.2

I'm able to browese to http://filername/na_admin and create a test lun successfully.