2012-04-19 12:50 AM - edited 2015-12-18 01:19 AM
very often is quite complex to determine with Snapmanager for Oracle which is the right combination of o.s, cluster, Oracle configuration and so on that's really supported and working.
To do that the IMT and the release notes of a lot of products must be crossed.
My question is very simple. Assuming Data Ontap 8.x and a FC SAN environment which combination of X64 operating systems, cluster protection (MSCS failsafe, Linux, RAC...) for an active/passive Oracle and, of course, Snapmanager for Oracle which are the environment really supported and working?
Thank you in advance
Solved! SEE THE SOLUTION
2012-04-19 01:36 AM
This is typically a deployment consideration question. I am assuming you have access to the NetApp support site.
Please download the latest release of SMO "Installation and Administration Guide" from http://support.netapp.com (you will be asked to enter your login details along with your password) and then look for the following sections:
"Supported host software"
"Supported general configurations"
I hope these will answer all your questions in detail. Please feel free to reply if there is anything else required.
2012-04-19 01:52 AM
I know it. Your suggestion is a good starting point but the manual anyway resend me to the IMT...I.e., for clustered configuration a statement in the SMO IAG is done:
SnapManager supports the same host cluster and HA pair configurations that the SnapDrive product and Host Utilities Kit support: sometime this is quite complex to determine. Anyway I'll repeat a double check in the IMT.
And doing this I immediately found something strange. Putting FC Host Utilities, Microsoft Clustering in the matrix with FC SAN and Data ONTAP 7.x/8.x I found that Snapdrive (certain versions of course) is supported. Clicking on the SMO field the IMT answer that "there's no related info" while clicling on SME, SMSQL or SMSP there are the list of supported environment. Why? SMO is not supported while the guide says that in MSCS is?
Thanks a lot
2012-04-19 02:27 AM
I know what you are saying. Your question is more oriented towards the search criteria associated with the IMT. And I agree, sometimes it gets complex when you have multiple components involved. Now my suggestion to you is: first let's get the IMT search criteria clarified and then we can move onto the SMO support. Is that ok?
You will notice a link to the user guide on the top right corner. This is usually the starting point to understand the overall search criteria. This will help you traverse through the IMT meaningfully.
In the center of the page towards the top you will notice a “storage solution” icon where “SAN” is selected as default. Now your objective is to look for “SMO” and therefore it’s time for you to change your default option to “SMO”. Click on change and select “SMO” located under the “standard solutions” radio button and down under the category: Software -> Management Software -> Database Suite - > SnapManager for Oracle (SMO).
Fine tune your search criteria if it shows too many results in the “configuration found”. Please let me know if that answers your query.
2012-04-19 07:45 AM
Sorry to perhaps be redundant, but wanted to emphasize a few points that will help in using the IMT.
First, for higher order apps such as SnapDrive and SnapManager, you cannot expect to get valid and complete results without comparing your search criteria over the multiple, dependant, Storage Solutions. In this case: SAN<->SDU<->SMO or SAN<->SDW<->SMO
Within the IMT, the feature or process is referred to as "End-to-End Views."
I've attached a .pdf of search results for a RHEL system suggesting SDU and SMO support.
So building on Naveen's previous reponses, what I would ask is you continue the same effort and either work down (end-to-end) from SMO to SDU or SDW and on to Linux SAN or Windows SAN.
Once you can trace your configuration across those three Storage Solutions, you can confirm support for your config.