Subscribe

VSC 4 missing VAAI and getting no VMs for aligned/not aligned

When will VAAI plugin be available ? The release notes say "coming soon"

And the alignment detection is returning no VMs found although my datastores are full of 95% aligned VMs

Re: VSC 4 missing VAAI and getting no VMs for aligned/not aligned

is this something your team handles or should this be asked in the NetApp Support Community?

Mike

Re: VSC 4 missing VAAI and getting no VMs for aligned/not aligned

Looks like you were not able to help on this issue here.  We have external and internal subject matter experts in the NetApp Support Community answering questions about SnapX products and software.  If you have a NOW login, this link enables you to engage them about this

Re: VSC 4 missing VAAI and getting no VMs for aligned/not aligned

No help - I'm kind of surprised since the promise of no downtime realignment is a killer feature - but its not available/functioning

Information on the NFS VAAI Plugin

The NFS VAAI Plugin does not ship with VSC for VMware vSphere. You must download the plugin from  the NetApp Support Site and manually install it.

Details on installing the plug-in are in Knowledge base article 3013414 How to install the NFS VAAI plugin for VSC 4.0 for VMware vSphere, which is online at kb.netapp.com/support/index?page=content&id=3013414.

Highlighted

Re: VSC 4 missing VAAI and getting no VMs for aligned/not aligned

Fresh install of 4.0.

Getting the same issue with no VMs showing up.

I'm also getting "No controllers found" in the Provisioning and Cloning tab:

Even though the controllers are clearly defined and present:

I've tried rebooting the host where VSC is installed with no luck.

Re: VSC 4 missing VAAI and getting no VMs for aligned/not aligned

Hello,

I'm sorry you're having trouble with this.  Would you please open a support case?  This way we can get a look at the logs and see whats going on.

Thanks,

Eric

Re: VSC 4 missing VAAI and getting no VMs for aligned/not aligned

Hello,

I'm sorry you're having trouble with this as well.  Would you please open a support case?  This way we can get a look at the logs and see whats going on.

Thanks,

Eric

Re: VSC 4 missing VAAI and getting no VMs for aligned/not aligned

A couple of things to note on this thread.

First, I'd like to make sure that folks understand there is no relationship between the Online Alignment feature in VSC 4.0 and the VAAI plugin for NAS. We are expecting to post the NFS VAAI plugin soon. Note that the first release supports requires Data ONTAP 8.1 running in cluster mode; NFS VAAI support for 7-mode is expected to be available in Data ONTAP 8.1.1.

The online alignment feature in VSC 4.0 supports VMFS datastores only, because the underlying mechanism used is to create LUNs that have specific alignment characteristics and migrating the matching VMDKs to those LUNs via vSphere's Storage VMotion feature. With vSphere 5.0 and higher, the Storage VMotion should invoke the SAN VAAI primitives if you're running the appropriate Data ONTAP release and have copy offload enabled. The SAN VAAI copy offload feature does not require a separate ESX plugin, and therefore you should be able to use this now. We expect to provide support for on-line alignment for NFS datastores in future releases of Data ONTAP and the VSC.

Finally, the VSC is a supported NetApp product. If you're not seeing VMs in the optimization & migration tab, or not seeing controllers in the RCU tab, please reach out to our support organization and open a case. They will assist you with collecting the diagnostic information needed to triage the problem, and work with engineering if there is a bug. Not only will this help you get VSC working in your environment, it will help us identify and track where customers are encountering problems, and where the product and/or the documentation could be improved.

Thanks,

-Eric Wittle

Engineering Director, VMware Ecosystem Organization

Re: VSC 4 missing VAAI and getting no VMs for aligned/not aligned

Thanks for the comprehensive reply - no need for NFS customers to open a case

"NFS VAAI support for 7-mode is expected to be available in Data ONTAP 8.1.1."

"We expect to provide support for on-line alignment for NFS datastores in future releases of Data ONTAP and the VSC."

We keep hearing NFS adoption is out pacing other protocols - why are NFS customers relegated to second class citizens when it comes to support?

When will NFS customers get a fair deal ?

Netapp, please set the trend and start supporting NFS first since its the leading protocol in new deployments, overtaking the others

thanks

Re: VSC 4 missing VAAI and getting no VMs for aligned/not aligned

One point of clarification: You should be able to scan NFS datastores today (VSC 4.0).  You should also be able to migrate groups of VMs to and from NFS datastores.  The only limitation with regard to NFS datastores is that we can't yet create  an optimized NFS datastore.  Note that the optimized datastore is one that automatically corrects VM misalignment.

I hope this helps,

Eric