2016-05-10 12:33 PM
FAS2240-2 running 8.1RC3 in 7-mode.
We had a network failure that caused a failover for one of the 2 controllers on our FAS2240-2.
Performed a 'takeback' that was unsuccessful.
Performed a 'reboot' that succesfully restored the filer.
Users have access to read/write and did not lose data, but the disks show a status of "Broken" as viewed from the opposite controller, ie, Controller A shows the disks in odd-numbered bays as "broken" and vice versa for Controller B with the even-numbered bays.
I have looked at this KB article but the disks are not failed.
The Logs do not say anything about a failure or error on the disks.
2016-05-11 09:53 AM
To this today, i still dont' understand how people run RC code in production. It boggles my mind..
You should look into upgrading when you get your shelf/disk fixed. And I would call support