Community

Subscribe
Highlighted
Accepted Solution

DOT NDU for Single Path-HA?

Hi All,

Please find the "sysconfig" outputs from our FAS3170 HA Pair. We are planning to upgrade DOT from 8.0.1P4 7-Mode to 8.1.3 P3 7-Mode.

This system is single pathed HA. Is it possible to do NDU?

Filer-A> sysconfig

        NetApp Release 8.0.1P4 7-Mode: Sat Apr  2 13:41:25 PDT 2011

        System Rev: A0

        System Storage Configuration: Single-Path HA

        System ACP Connectivity: NA

        slot 0: System Board

                Processors:         4

                Processor type:     Opteron

                Memory Size:        16384 MB

                Memory Attributes:  Node Interleaving

                                    Bank Interleaving

                                    Hoisting

                                    Chipkill ECC

                Controller:         A

        Remote LAN Module           Status: Online

        slot 0: Internal BGE 10/100 Ethernet Controller

                e0M MAC Address:    00:a0:98:0d:d3:62 (auto-100tx-fd-up)

        slot 0: BGE 10/100/1000 Ethernet Controller

                e0a MAC Address:    00:a0:98:0d:d3:60 (auto-1000t-fd-up)

                e0b MAC Address:    00:a0:98:0d:d3:61 (auto-1000t-fd-up)

        slot 0: ATA/IDE Adapter 0e (0x000001f0)

                0e.0   STEC NACF1GM1U-B11   01/17/07  977MB  512B/sect (STI1MNK408176134257)

        slot 0: NVRAM

                Memory Size:        2048 MB

                Running Firmware:   4 (4.8.940)

                Cluster Interconnect Port 1: 4x copper

                Cluster Interconnect Port 2: 4x copper

        slot 0: Fibre Channel Target Host Adapter 0a

        slot 0: Fibre Channel Target Host Adapter 0b

        slot 0: Fibre Channel Target Host Adapter 0c

        slot 0: Fibre Channel Target Host Adapter 0d

        slot 1: FC Host Adapter 1a

        slot 1: FC Host Adapter 1b

                42 Disks:            11424.0GB

                3 shelves with ESH4

        slot 1: FC Host Adapter 1c

                28 Disks:            7616.0GB

                2 shelves with ESH4

        slot 1: FC Host Adapter 1d

                14 Disks:            5923.5GB

                1 shelf with AT-FCX

        slot 2: FC Host Adapter 2a

        slot 2: FC Host Adapter 2b

        slot 2: FC Host Adapter 2c

        slot 2: FC Host Adapter 2d

        slot 4: Quad 10/100/1000 Ethernet Controller G20

                e4a MAC Address:    00:15:17:95:a7:b4 (auto-unknown-down)

                e4b MAC Address:    00:15:17:95:a7:b5 (auto-unknown-down)

                e4c MAC Address:    00:15:17:95:a7:b6 (auto-unknown-down)

                e4d MAC Address:    00:15:17:95:a7:b7 (auto-unknown-down)

Filer-A>

Filer-B> sysconfig

        NetApp Release 8.0.1P4 7-Mode: Sat Apr  2 13:41:25 PDT 2011

        System Rev: A0

        System Storage Configuration: Single-Path HA

        System ACP Connectivity: NA

        slot 0: System Board

                Processors:         4

                Processor type:     Opteron

                Memory Size:        16384 MB

                Memory Attributes:  Node Interleaving

                                    Bank Interleaving

                                    Hoisting

                                    Chipkill ECC

                Controller:         B

        Remote LAN Module           Status: Online

        slot 0: Internal BGE 10/100 Ethernet Controller

                e0M MAC Address:    00:a0:98:0d:d3:6e (auto-100tx-fd-up)

        slot 0: BGE 10/100/1000 Ethernet Controller

                e0a MAC Address:    00:a0:98:0d:d3:6c (auto-1000t-fd-up)

                e0b MAC Address:    00:a0:98:0d:d3:6d (auto-1000t-fd-up)

        slot 0: ATA/IDE Adapter 0e (0x000001f0)

                0e.0   STEC NACF1GM1U-B11   01/17/07  977MB  512B/sect (STI1MNX108176135025)

        slot 0: NVRAM

                Memory Size:        2048 MB

                Running Firmware:   4 (4.8.940)

                Cluster Interconnect Port 1: 4x copper

                Cluster Interconnect Port 2: 4x copper

        slot 0: Fibre Channel Target Host Adapter 0a

        slot 0: Fibre Channel Target Host Adapter 0b

        slot 0: Fibre Channel Target Host Adapter 0c

        slot 0: Fibre Channel Target Host Adapter 0d

        slot 1: FC Host Adapter 1a

                42 Disks:            11424.0GB

                3 shelves with ESH4

        slot 1: FC Host Adapter 1b

        slot 1: FC Host Adapter 1c

                14 Disks:            5923.5GB

                1 shelf with AT-FCX

        slot 1: FC Host Adapter 1d

                28 Disks:            7616.0GB

                2 shelves with ESH4

        slot 2: FC Host Adapter 2a

        slot 2: FC Host Adapter 2b

        slot 2: FC Host Adapter 2c

        slot 2: FC Host Adapter 2d

        slot 4: Quad 10/100/1000 Ethernet Controller G20

                e4a MAC Address:    00:15:17:95:a7:c0 (auto-1000t-fd-down)

                e4b MAC Address:    00:15:17:95:a7:c1 (auto-unknown-down)

                e4c MAC Address:    00:15:17:95:a7:c2 (auto-unknown-down)

                e4d MAC Address:    00:15:17:95:a7:c3 (auto-unknown-down)

Filer-B>


Regards,

Dhakshinamoorthy Balasubramanian

Re: DOT NDU for Single Path-HA?

Yes, it is possible.

Re: DOT NDU for Single Path-HA?

Thanks

Re: DOT NDU for Single Path-HA?

hi dhakshina,

single path or multi path both possible NDU, but CIFS only disconnect during the DOT....

Re: DOT NDU for Single Path-HA?

Do we need to disconnect/terminate CIFS session?