Subscribe

ESH Module

I am getting the following messages in Syslog:

AUTO TERMINATION ERROR: TERM switch set improperly to ESH A on channels 4a/PARTNER shelf id 1

Shelf previously connected to OUT port of ESH A on channels 4a/PARTNER shelf id 1 is now inaccessible!

AUTO TERMINATION ERROR: TERM switch set improperly to ESH B on channels 4a/PARTNER shelf id 1

Shelf previously connected to OUT port of ESH B on channels 4a/PARTNER shelf id 1 is now inaccessible!

All the disks are accessible and there are no users reporting problems.

The ESH2 that are in this shelf do not have a term switch on them?

System is a FS3020 running 7.1 all the disk shelves are up to the latest firmware.

The system was powered off two days ago for maintenance, I reseated the ESH modules and replaced the fibre cables to the shelf.