Subscribe

FAS2050 Configuration

[ Edited ]

Hi,

I'm trying to configure a FAS2050 via HTTP

I get on HTTP://"FAS2050 ip address"/na_admin/ -> insert username and password

After that i get

 

ERROR 500

Servlets not enabled

 

Can anybody help me with this issue?

That the httpd authorizations on console are

 

httpd.access            legacy
httpd.admin.access      legacy
httpd.admin.enable      on

httpd.admin.hostsequiv.enable off

httpd.admin.max_connections  512

httpd.admin.ssl.enable  on

httpd.admin.top-page.authentication on

httpd.autoindex.enable  off

httpd.bypass_traverse_checking off

httpd.enable            on
httpd.ipv6.enable       off
httpd.log.format        common (value might be overwritten in takeover)
httpd.method.trace.enable off
httpd.rootdir           XXX
httpd.timeout           300   (value might be overwritten in takeover)
httpd.timewait.enable   off   (value might be overwritten in takeover)

 

 

 

Thanks

Re: FAS2050 Configuration

 

Dan -

 

The Filerview web GUI has been deprecated for Data ONTAP 8.

The http admin options are all for enabling API over http.

 

You can download and use the System Manager GUI from mysupport.netapp.com.


I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

Re: FAS2050 Configuration

Hi,

Thanks so much for your answer.

The OnTap running on the FAS2050 is the 7.3.6, so i shouldn't have this problem.

Any other idea?

Thank you

Re: FAS2050 Configuration

Hi,

 

Was it working earlier and this situation happened out of nowhere?  Any details you can provide would be useful.

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

Re: FAS2050 Configuration

Hi,

No it wasn't. We are trying to do the first configuration.

It works via "console" through RS232, we have this problem when we try to connect via http.

 

Thanks

 

 

Re: FAS2050 Configuration

Hi,

 

Any other idea about this topic?

 

Thanks