ONTAP Discussions

FC Port name, FC node name, Fc host adapter and Fc target adapter.

MetroLife
4,274 Views

Hi,

 

We have old Netapp box FAS 3140. I have seen FC port name and FC node name. Where we use FC port name and where we use in FC node name.

 

 

 

I have seen Fc host adapter and FC host target adapter.

 

We have used FC host adapter to connect disk shelfs and FC target adapter for FCOE connectivity. Could we convert FC host adapter to target adapter ? If yes this process need a reboot to take a effect?  

1 ACCEPTED SOLUTION

Sahana
4,239 Views

FC node name is the WWN of the FC card. FC port name is the the WWN of individual ports on the card.

Ex: In a 2 port FC card, it will have 1 FC node name (card WWN) and 2 port names (2 WWPN: 1 for each port)

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

3 REPLIES 3

Sahana
4,261 Views

Hi,

 

Please refer KB https://kb.netapp.com/support/s/article/ka31A0000000nV8QAI/how-to-convert-on-board-fc-ports-from-initiator-to-target?language=en_US

You will need to reboot for changes to take effect

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

MetroLife
4,243 Views

Hi Sahana,

 

Where we use FC port name and FC Node name. what is the difference between those.

 

Thanks

Sahana
4,240 Views

FC node name is the WWN of the FC card. FC port name is the the WWN of individual ports on the card.

Ex: In a 2 port FC card, it will have 1 FC node name (card WWN) and 2 port names (2 WWPN: 1 for each port)

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Public