Subscribe

Filer performance

I have heard that the best way to troubleshoot performance issues is perfstat. How can a normal customer read a perfstat?

 

i have been told the only way is a partner only tool?

 

thanks

Re: Filer performance

 

Nick -

 

Perfstat is a very comprehensive tool for filere analysis.

It runs a comprehensive list of just about every config and perfomance command we'd want to see the output of if looking for a performance problem.

Configuration commands are also run on the client side.

The report includes pre and post test statistics.

You need to understand the output of all the commands to read the report.

 

There is a partner tool, 'Perfstat Viewer' that will help parse the output.

 

The quick shot tool I first pull out to look at performance is 'sysstat'.

 

My prefered tool for clients to monitor and analyze performance is using OnCommand Unified Manager.

You may wish to also look at the MyASUP feature on mysupport.netapp.com for historical performance graphing.


I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

 

 

Re: Filer performance

Hi,

 

This article gives a detailed description about the Perfstat tool and the various issues seen while running the perfstat tool.
https://kb.netapp.com/support/index?page=content&id=3013639

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.