Subscribe

FlashPool creation - Different size SSD's

Hi,

 

Currently running 8.2.3 7-Mode and have 6 x 100Gb SSD's and 4 x 200Gb's SSD's all set to SPARE at the moment.

I want create 2 seperate Flashpools as such, to maximize the SSD' capacity, rather than the 200's sizing down to 100's...

 

So, what I want to do is create:

 

1 x RAID-DP group of 6 x 100 SSD's

1 x RAID-DP group of 4 x 200 SSD's

 

I don't want to leave a spare SSD in either group.  If I try doing this via the GUI, the system always want to leave one of the 200's as a spare.  

 

I know the aggregate with need enabling as hybird mode.    I'm thinking I first need to create a RAID-DP group with the 4 x 200's with a RAID group size of 4.  Would it then be possible for me to create a seperate group, RAID size 6 for the remining 6 x 100 SSD's ?  Ultimately I want to get a combined SSD Flashpool capacity of 743Gb.

 

 

Re: FlashPool creation - Different size SSD's

Hi,

 

Please refer Best Practice Recommendations and Interoperability on page 16 of  Flash Pool Design and Implementation Guide

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.