ONTAP Discussions

How ONTAP is managing Leap Second 2015

gaurav_verma
4,786 Views

Hey

 

I can not find any information on Leap second addition in support. Can someone please help me to understand how ONTAP is going to manage this? 

 

http://www.timeanddate.com/time/leapseconds.html

 

Thanks

GV

1 ACCEPTED SOLUTION

mbeattie
4,763 Views

Hi,

 

Assuming you have configured ONTAP to sync with an NTP time source and issues such as kerberos clock skew only occur if the time between the storage controller and domain controller is greater than 300 seconds (5 minutes) different then I don't think this will present risk. If the time is correct on the NTP source then Data ONTAP will transition through the leap second event.

 

https://kb.netapp.com/support/index?page=content&id=3011978&locale=en_US

 

Hope that helps

 

/matt

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

2 REPLIES 2

mbeattie
4,764 Views

Hi,

 

Assuming you have configured ONTAP to sync with an NTP time source and issues such as kerberos clock skew only occur if the time between the storage controller and domain controller is greater than 300 seconds (5 minutes) different then I don't think this will present risk. If the time is correct on the NTP source then Data ONTAP will transition through the leap second event.

 

https://kb.netapp.com/support/index?page=content&id=3011978&locale=en_US

 

Hope that helps

 

/matt

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

gaurav_verma
4,758 Views

Thanks Matt. I was looking for such article as official words.

Public