Community

Subscribe
Highlighted

How to Access Data ONTAP CLI Prompt

Hello:

     I am using FAS3270! May I know how can I access to the Data ONTAP CLI Prompt? Does ssh/telnet to the Controller is the Data ONTAP CLI Prompt?

Thanks!

Re: How to Access Data ONTAP CLI Prompt

HI,

  You can use either ssh or telnet. Following are the options in ONTAP:

[root@elbow-vm23 ~]# ssh sin.rtp.netapp.com options | grep -i ssh.enable

root@sin.rtp.netapp.com's password:

ssh.enable                   on

[root@elbow-vm23 ~]# ssh sin.rtp.netapp.com options | grep -i telnet.enable

root@sin.rtp.netapp.com's password:

autologout.telnet.enable     on         (value might be overwritten in takeover)

telnet.enable                on         (same value required in local+partner)

Thanks,

  Arun

Re: How to Access Data ONTAP CLI Prompt

Thanks a lot! Does the SP also using the same telnet/ssh function?

Re: How to Access Data ONTAP CLI Prompt

yes.  ssh using the username "naroot" and the root password.  Once in the sp, type "system console" then you can login to the console the same as you do from ssh direct to the 3270.

Re: How to Access Data ONTAP CLI Prompt

Thanks a lot!