2014-03-18 05:55 AM
We have a strong desire to run Oracle VM on cDOT 8.2 in a Flexpod environment which we already have in place.
All of the documentation I have found is for 7-mode filers.
I am wondering if there are any caveats or limitations to using NFS repositories or FCoE boot luns.
Also, should the OSTYPE for LUNs and igroups be Linux or XEN?
Any advise is greatly appreciated.
Solved! SEE THE SOLUTION
2014-03-18 06:31 AM
NetApp and Oracle has written the joint vendor OVM Best practice technical report(TR-3712), which will be released to puplic in couple of days in www.netapp.com/us/library/.
The OSTYPE for LUNs and igroups should be linux.
2014-04-08 05:57 AM
We have been unable to get OVM Manager to work with the showmount plug-in for cDOT and thus register the NFS volumes. I believe we are missing something and TR-3712 does not give specific instructions on how
to configure OVM Manager to use NFS volumes on cDOT. I can install the plug-in and it runs correctly from the command line. Since the plug-in communicates with a management port on the filer and the volume is accessed
from a data port, we are not sure how to configure the Generic NFS plug-in in OVM Manager. Obviously it must work since the authors of TR-3712 did it.
2014-04-10 05:57 AM
I found the answer.
The showmount plug-in should be installed on ALL OVM servers.
The LIFs used to access (mount) the NFS repository volumes should have the mgmt firewall policy so the showmount plug-in can access with ONTAPI.
The volume for the repository must be exported and mountable on ALL OVM servers.
Make sure / is exported and is readonly! (Servers cannot mount anything if / is not exported.)
With these requirements met, normal procedures for filesystem management in OVM Manager can be followed.
2014-06-23 02:38 AM
Still having problems with the showmount plugin. We've done the four steps you list here but are still getting "Authorization Failed" from the plugin. I found this comment in NaServer.py:
def set_admin_user(self, user, password):
"""Set the admin username and password. At present 'user' must
always be 'root'.
Are you using root as the username?
2014-06-23 05:10 AM
You need to create an account on the StorageVM for the showmount tool to use. This is the SVM that contains the OVM repository.
Give the account vsadmin-readonly role and put the username and password for this account in the new showmount file as stated in the documentation.
I hope this helps.