Subscribe

Management IP

Hi,

 

On Cdot 8.2.2P2 with a 4 nodes cluster I have the following configuration:

Node 1    e0m/SP are on 10.x.x.12 and 13 for node management en Service Processor

Node 2    e0m/SP are on 10.x.x.14 and 15

Node 3    e0m/SP are on 10.x.x.16 and 17

Node 4    e0m/SP are on 10.x.x.18 and 19

 

SVM for cluster admin 10.x.x.20 for remote administration (ssh/On Comand)

Node 1    e0a

Node 2    e0a

Node 3    e0a

Node 4    e0a

 

Actually, they are on same switch/Network but customer would like to spread Cluster Management and Admin to different Network/Switch like below:

 

Node 1    e0m/SP are on 11.x.x.12 and 13 for node management en Service Processor

Node 2    e0m/SP are on 11.x.x.14 and 15

Node 3    e0m/SP are on 11.x.x.16 and 17

Node 4    e0m/SP are on 11.x.x.18 and 19

 

SVM for cluster management 192.x.x.20 for remote administration (ssh/On Comand)

Node 1    e0a

Node 2    e0a

Node 3    e0a

Node 4    e0a

 

I assume it should work but would like to double check so do you have already seen this kind of configuration? any issue with remote management ?

 

Any document related to this kind of configuration ?

 

Best Regards

 

Eric

Re: Management IP

TR-4182: Ethernet Storage Design Considerations and Best Practices for Clustered Data ONTAP Configurations

http://www.netapp.com/us/media/tr-4182.pdf

 

What LIF roles does clustered Data ONTAP use to establish connections to remote servers?

https://kb.netapp.com/support/index?page=content&id=3012724

Cannot find the answer you need?  No need to open a support case - just CHAT and we’ll handle it for you.