Subscribe

ONTAP support for RHEL 6.4

We will be building new servers for Hadoop using Cisco UCS.  RHEL 6.4 or 6.6 will be installed on these nodes.  Is this version of RHEL support with ONTAP 8.1.4 (c-mode and 7-mode)?

 

Thanks in advance.

Re: ONTAP support for RHEL 6.4

 

See the 'Interoperability Matrix Tool' on the NetApp support site:

http://mysupport.netapp.com/NOW/products/interoperability/


I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

 

Re: ONTAP support for RHEL 6.4

I am new to Netapp and have been trying to figure the tool out.  However, when i choose UCS C240 as the host platform, FC is not an option for a protocol.

Re: ONTAP support for RHEL 6.4

You can find this information here http://mysupport.netapp.com/matrix/enduser/displayAdvancedSearch.do;jsessionid=3E7982F22F5D3CE27DFD280DE3520CD6

 


ONTAP OS

NetApp Data ONTAP 8.1.1 7-Mode
NetApp Data ONTAP 8.1.1 Cluster-Mode
NetApp Data ONTAP 8.1.2 7-Mode
NetApp Data ONTAP 8.1.2 Cluster-Mode
NetApp Data ONTAP 8.1.3 7-Mode
NetApp Data ONTAP 8.1.3 Cluster-Mode
NetApp Data ONTAP 8.1.4 7-Mode
NetApp Data ONTAP 8.1.4 Cluster-Mode
NetApp Data ONTAP 8.1 7-Mode
NetApp Data ONTAP 8.1 Cluster-Mode

Host Platform
Cisco UCS B200 M1
Cisco UCS B200 M2
Cisco UCS B200 M3
Cisco UCS B200 M4
Cisco UCS B22 M3
Cisco UCS B230 M1
Cisco UCS B230 M2
Cisco UCS B250 M1
Cisco UCS B250 M2
Cisco UCS B260 M4
Cisco UCS B420 M3
Cisco UCS B440 M1
Cisco UCS B440 M2
Cisco UCS B460 M4
Cisco UCS C-Series C200 M2 Server
Cisco UCS C-Series C210 M2 Server
Cisco UCS C-Series C220 M3 Server
Cisco UCS C-Series C220 M4 Server
Cisco UCS C-Series C22 M3 Server
Cisco UCS C-Series C240 M3 Server
Cisco UCS C-Series C240 M4 Server
Cisco UCS C-Series C24 M3 Server
Cisco UCS C-Series C250 M2 Server
Cisco UCS C-Series C260 M2 Server
Cisco UCS C-Series C420 M3 Server
Cisco UCS C-Series C460 M1 Server
Cisco UCS C-Series C460 M2 Server
Cisco UCS C-Series C460 M4 Server

Guest OS Supported
RHEL Server 6.4 32-bit
RHEL Server 6.4 64-bit

 

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

Re: ONTAP support for RHEL 6.4

Is this configured supported by the FC protocol?  Also, i'm not seeing support for RHEL Server 6.6.  Is that on the roadmap?