ONTAP Discussions

Ontap 9 select crash after upgrade to esxi 6.5

stephenyu
4,906 Views

How can I fix this issue? 

Screen Shot 2017-02-10 at 1.53.23 AM.png

1 ACCEPTED SOLUTION

stephenyu
4,777 Views

thanks a lot

I added floppy drive in VM. 

Netapp can boot up

View solution in original post

7 REPLIES 7

SeanHatfield
4,894 Views

Was the VM hardware version upgraded?  This same behaviour will occur starting around vm hardware version 11.

 

 

 

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

stephenyu
4,857 Views

I did not upgrade hardware. Any solution I can power on back netapp

SeanHatfield
4,844 Views

From the loader prompt run this command and post the output:

lsdev

 

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

stephenyu
4,802 Views

Screen Shot 2017-02-10 at 6.19.26 PM.png

SeanHatfield
4,800 Views

Drive A is missing.  Add a floppy drive to the VM, and connect a blank floppy image.  Then see if it will come up.

 

The fat16 volume is expected to be on disk1s2.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

stephenyu
4,778 Views

thanks a lot

I added floppy drive in VM. 

Netapp can boot up

stephenyu
4,833 Views

I did not upgrade hardware. Any solution I can power on back netapp

Public