Subscribe
Accepted Solution

Ontap 9 select crash after upgrade to esxi 6.5

How can I fix this issue? 

Screen Shot 2017-02-10 at 1.53.23 AM.png

Re: Ontap 9 select crash after upgrade to esxi 6.5

Was the VM hardware version upgraded?  This same behaviour will occur starting around vm hardware version 11.

 

 

 

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

Re: Ontap 9 select crash after upgrade to esxi 6.5

I did not upgrade hardware. Any solution I can power on back netapp

Re: Ontap 9 select crash after upgrade to esxi 6.5

From the loader prompt run this command and post the output:

lsdev

 

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

Re: Ontap 9 select crash after upgrade to esxi 6.5

I did not upgrade hardware. Any solution I can power on back netapp

Re: Ontap 9 select crash after upgrade to esxi 6.5

Screen Shot 2017-02-10 at 6.19.26 PM.png

Re: Ontap 9 select crash after upgrade to esxi 6.5

Drive A is missing.  Add a floppy drive to the VM, and connect a blank floppy image.  Then see if it will come up.

 

The fat16 volume is expected to be on disk1s2.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

Re: Ontap 9 select crash after upgrade to esxi 6.5

thanks a lot

I added floppy drive in VM. 

Netapp can boot up