Subscribe

Silence failed disc stil being present message

Hi,

 

I have a failed disc in a filer, it's replaced by a spare so all is good. The filer is now logging a message each day that the disc is still there "is still present in the system and should be removed. ".  I know the easyest thing is to actually remove the disc but I can't  / don't want to / it's a long story.

 

Question is, is there a way to silence this message for this disc / entirely?

 

Regards

 

Jappe

Re: Silence failed disc stil being present message

Hello,

Have you tried to change ownership of the disk and put it as an unassigned?

or run command disk remove <disk_name> to spin it down?

maybe it helps

Re: Silence failed disc stil being present message

[ Edited ]

hi

 

thanks!

 

disk remove 0d.01.23

 

did nothing new

 

disk remove_ownership

 

Disk ownership change request failed on disk 0d.01.23 (S/N PAGR69SD). Status: 3.  

 

The disk remains in

 

admin failed    0d.01.23

 

I guess I just should remove this this one way or the other ;-)

Re: Silence failed disc stil being present message

Hi,

 

Try

 

 

>>>Vol status -f

--- If you are unable to see the Disk and it is not present in the below command as well.

 

 

>>>Vol status -s

---If your disk is not available here too,

 

Then try

 

>>>disk show -n or disk show <disk id >

 

--- mostly you will get the disk not owned status over here...

 

 

Assign the same back to storage array.

 

 

>>>disk assign <disk id>

 

 

---after this cross check in again with disk show <disk id > , and it will come under storage | spare pool.

 

--------------------- If you want to get rid of messages coming from DFM, Just go to that alert and Acknowledge the message, so that it wont trigger u again.