2014-11-26 06:13 AM - edited 2014-11-26 06:28 AM
I am really hoping someone can advise me on this as after week of setting up SV its not working the way I am expecting.
The issue I am having is I have created a SV relationship on my destination filer but the source copy is a snapmirror destination volume. I then want to create more retentions from that Snapmirror destination volume e.g. 1 month as the SM job only retains 2 days of backups between the source and destination filer. All of our flexvols are luns presensted to a VMware farm so the data is VMFS files only.
The reason why I am doing this is I want to utilise the already present snapmirror relationship and so dont want to create another snapvault relationship back to the primary because it means another baseline backup would need to be performed which would take a very long time. As the snapmirror has already done this for me, I want to just create longer retentions from the snapmirror backups but its not working as expected?
I created a new flexvol on the destination filer where all the SV jobs would go to and it has been saving snapshots however any new data change updates from the primary filer to seconday are not getting copied over, I have proved by creating flexclones of the volumes at both source and desintation, on the source I can see the file changes made when I bring up another instance of the live VM and inside the VM I can see the changes, if I do the same on the desintation filer I dont see those changes.
Snapvault is performing a backup on the desintation side from the snapmirror destination volume.
My questions are is this possible? If so how would I set this up? I am not performing any preserve snapshots btw on both filers, also I was under the impression that I would need qtrees only on the destination volume? as my source volumes dont have qtrees is that going to be ok? will the cause issues withe SV?
2014-11-27 06:44 AM
I am using Data ONTAP 7-mode.
Am I right in saying that what you mention only works with Clustered ONTAP?
2014-11-27 10:18 AM
2014-11-27 11:55 PM
Thanks for your reply.
I am aware that I can create from snapvault jobs from Destination to source and I have done this for some new flexvols I have created which didnt utilise a snapmirror relationship.
However I do have existing Snapmirror relationships already in place which are working between our source and destination filer. If I create new snapvault jobs and target it back to the primary filer, wont it need to do another baseline transfer first as the destination volume will be dedicated for the snapvaults repository? If this is the case this is what I am trying to avoid as the baselines transfers will take a very long time.
Thats why I am hoping for the existing snapmirror volumes I can just perform snapvaults of those for volumes where I need a longer retention.
Is there a way I can achieve this without rerunning new basline transfers?
hope that make sense?
2014-11-28 02:26 AM
2014-12-02 02:07 AM - edited 2014-12-02 02:08 AM
Ok maybe I haven't explained it properly.
Here is an entry for one volume that is snapmirrored across from one filer to another.
FASPROD12:NETAPP_prf2_esx_w2k12_sas_01 FASDR12:NETAPP_prf2_esx_w2k12_sas_01 kbs=80000 * 7,13,19 * 0,1,2,3,4,5,6
FASPROD12 - is our source and Production filer. At primary site.
FASDR12 is our destination and DR Filer at DR site
Now what I want to do is create a snapvault relationship on the DR/destination filer of the volume NETAPP_prf2_esx_w2k12_sas_01 so that I can create longer retentions as the snapmirror only has a retention of 2 days.
Below is the snapvault job I have created on the destination filer, it has performed the initial baseline transfer ok but I am having trouble it creating further snapshots from this, the last snapshot it created was the 27th of last month and I dont fully understand why it has suddenly stopped.
Hope this clarifies things a little
2014-12-02 02:13 AM
Now what I want to do is create a snapvault relationship on the DR/destination filer of the volume NETAPP_prf2_esx_w2k12_sas_01
I'm sorry, I do not understand it. SnapVault is created between source and destination. What is source filer and qtree and what is destination filer and qtree?
2014-12-02 02:31 AM
Ok on the source side we dont use qtrees at all. The snapmirrors are all volume snapmirrors and where we are using Snapvault they are all "non-qtree snapvault relationships". On the destination side though there needs to be a qtree so there is a qtree for the snapvault volume destination so in the case of the example I gave earlier it is set out like this:
Source - CENWBFASDR02:/vol/NETAPP_prf2_esx_w2k12_sas_01/-
Destination - CENWBFASDR02:/vol/SVBackups_NETAPP_prf2_esx_w2k12_retain01m_sas_01/q_NETAPP_prf2_esx_w2k12_retain01m_sas_01 (q signifies its a qtree)
2014-12-02 02:40 AM
Sigh ... you again give different names as before, so I only can assume that CENWBFASDR02 means the same as FASDR12 in your previous post. In this case it is as I already told you - you need to setup SnapVault snapshot schedule on FASPROD12 (taking your example). These snapshots will be replicated to FASDR12 by SnapMirror and then picked up by SnapVault.