2014-11-26 10:16 PM
I attemped creating an aggregate.
My system has an different of mixing disks. 600GB, 450GB..
I want to create an aggregate contains 600GB disks.
::> aggregate create -aggregate aggr1 -diskcount 5 -disktype "???"
If I make an aggregate all 600GB.
What size of the number?
I don`t know how to measure that.
2014-11-26 11:00 PM
disk-type specifies the Data ONTAP drive type. This option is needed when creating aggregates on systems that have mixed drive types or both drives and array LUNs.
for example : FCAL, SAS,SSD etc.
2014-11-26 11:05 PM - edited 2014-11-26 11:10 PM
-disksize specifies the size, in GB, of the disks on which the aggregate is to be created. Disks with a usable size between 90% and 105% of the specified size are selected.
You can choose -disksize as 600GB, am I answering your question? If not, can you give me more clarity on the question please?
2014-11-26 11:12 PM
What size is specify GB?
Physical size or other size?
In 7-mode, If I create an aggregate contain 600GB, 5disks
> aggr craate aggr1 600@5
How do I same thing in Clustere Data Ontap?
2014-11-26 11:23 PM - edited 2014-11-26 11:24 PM
My installed System Has 24 450GB disks and 24 600GB disks.
If I create an agreegate only using 5 450GB disks.
So how do I creat an aggregate do not mixed 600GB Disks?
Shuld I use options for particula disks?
2014-11-27 12:27 AM - edited 2014-11-27 12:28 AM
-disksize is the size per disk, not the total aggr size. you can see this link for more info about parameters which can be used https://library.netapp.com/ecmdocs/ECMP1511539/html/storage/aggregate/create.html