Subscribe

add image failed in on command manager for ONNTAP upgrade

Failed to add the software image to the cluster. Verify if the image and the specified URL are valid and ensure that there is sufficient space in the system management storage area.
what is the reason for this issue???

 

 

 

cl01.PNGc

Re: add image failed in on command manager for ONNTAP upgrade

I'm having the same issue, and still it persists even after getting rid of the old images that were in there.

 

I can't seem to find where the 'system management storage area' is in doco

Re: add image failed in on command manager for ONNTAP upgrade

Wow I feel stupid- so went to the command line and tried it thusly: get -url http://iisserver.corp.com/91_q_image.tgz

 

Got error msg: Error: command failed: Failed to download package from
       http://.../91_q_image.tgz. Error: Couldn't resolve host name : Couldn't
       resolve host 'iisserver.corp.com'

 

Tried with the IP and of course it worked as expected.

Re: add image failed in on command manager for ONNTAP upgrade

It is /mroot/etc/software in each of the nodes. On Clustered ontap, this is difficult to access directly, so pulling the image on with HTTP is suggested.

 

If the GUI fails, try the command line. Instructions for installing software images are at http://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-cmpr-910/TOC__system__node__image.html

Re: add image failed in on command manager for ONNTAP upgrade

Thanks Alex.

 

But i am looking to GUI based process where i can fixed this rather  than going CLI..

 

So will FTP server will work like -fttp://username@password:XXXXX/DATAONTAP\8_3_2_g.tgz file .

 

 

Anyone who has tried and stuck 

Re: add image failed in on command manager for ONNTAP upgrade

Please make sure the imgae file is copied to the directory C:\inetpub\wwwroot\ for http and C:\inetpub\ftproot for ftp

 

http://server_ip/image.tgz (C:\inetpub\wwwroot\image.tgz)