Subscribe

how to check if the storage is busy or not at the point of sometime in 7 mode?

The customer complains the storage is very slow. How can i chechk this kind of problem with commands ? Please help. Thanks.

Re: how to check if the storage is busy or not at the point of sometime in 7 mode?

[ Edited ]

There are a few ways you can check

 

sysstat - controller performance statistics (normally I specify interval = 1, for immediate result)

https://library.netapp.com/ecmdocs/ECMP1368825/html/cmdrefnow/man1/na_sysstat.1.html

 

netstat - network performance statistics

https://library.netapp.com/ecmdocs/ECMP1368825/html/cmdrefnow/man1/na_netstat.1.html

 

protocol specific

NFS

https://library.netapp.com/ecmdocs/ECMP1368825/html/cmdrefnow/man1/na_nfsstat.1.html

CIFS

https://library.netapp.com/ecmdocs/ECMP1196890/html/man1/na_cifs_stat.1.html

iSCSI

https://library.netapp.com/ecmdocs/ECMP1196979/html/man1/na_iscsi.1.html

 

And also performance advisor ..generally I start from latency, network throughput, try to narrow down the possibilities and find out the bottleneck.