Subscribe
Accepted Solution

metrocluster with brocade 300

Hi all,

According to the metrocluster guide we are supposed to set the disk loop port to half duplex by:

portCfgLPort <port#>,0,0,1

The problem is brocade 300 does not have last option 1 i.e to set half duplex where as brocade 300 seems to offer only 0 (full duplex) and 2 (full duplex with fairness). Any ideas?

Regards,

Babar

Re: metrocluster with brocade 300

Babar,

What version of Fabric OS are you running?

Highlighted

Re: metrocluster with brocade 300

Hi James,

v6.1.1a

Regards,

Babar

Re: metrocluster with brocade 300

Option 1 is in 6.1.x Supported

In FOS 6.2 and above not.

Re: metrocluster with brocade 300

Thanx. So shall I leave it 0 or change it to 2?

Regards,

Babar

Re: metrocluster with brocade 300

Oh but I m using 6.1.1a. How come I dont c the option then?

Regards,

Babar

Re: metrocluster with brocade 300

I would be leave Fixed of 0.

Re: metrocluster with brocade 300

--->>> How come I dont c the option then?

I do not understand what they want to say.

What you mean whit c option ?

Re: metrocluster with brocade 300

You said the option is removed 6.2 onwards. I have 6.1.1a but still option 1 is not working?

Regards,

Babar

Re: metrocluster with brocade 300

According the Command Reference Manuals  Part 53-1000599-03 is option 1 Supported.

duplex_mode

Specify 2 to configure the specified port as a full-duplex L_Port with fairness.
Specify 1 to configure the L_Port as a half-duplex L_Port with fairness.
Specify 0 to configure the L_Port as a full-duplex L_Port. This operand is
optional; if omitted, the default value of 0 is used.

I have check all 6.1.1 Release Notes and this command as not be changed beetwen this release

another idea what i have is, this feature is not supported in the 300 Brocade, but i'm not sure.

Another example, private_mode is supported on FC2 ( 2 GB ) Switches and Directors