ONTAP Discussions

perfstat viewer/parser

QL-Ryan_Rothert
7,565 Views

Does NetApp have a customer facing perfstat8 viewer?  Im familiar with LaTX  but this isnt available to customers.

 

 

Thanks,

Ryan

6 REPLIES 6

ekashpureff
7,398 Views

 

Ryan

 

I was able to get to LaTX on the support site here:

http://mysupport.netapp.com/info/web/ECMP1147404.html

 


I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, Fast Lane US http://www.fastlaneus.com/
(P.S. I appreciate 'kudos' on any helpful posts.)

 

 

 

QL-Ryan_Rothert
7,316 Views

Looks like a title page with not much content from my view.  Thanks for the link though.  Maybe this is something ntap is working on.

ekashpureff
7,309 Views

 

Ryan -

 

You may not have sufficient priv to use the tool.

It might be partner/internal only.

 

I get documentation and a link tp launch the web based tool ...

 


I hope this response has been helpful to you.

 

At your service,

 

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, FastLane US http://www.fastlaneus.com/
(P.S. I appreciate 'kudos' on any helpful posts.)

GlenG
7,264 Views

I am running 7-Mode but I asked a similar question of support and was told that the collected data is in ASCII so it is human readable.  At this point I have not found the data useful.

 

 

The latency graphs at MyAuitoSupport  have not been loading either.

 

 

Hope you  find something useful.

Glen

colsen
7,233 Views

Hello,

 

Just out of curiousity, what particular performance data are you looking for?  We've gone down the perfstat gather path many times and honestly we've only found it useful when we're doing a correlation analysis of something like an Oracle AWR output against the NetApp perfstat.  If we're just digging into how things are performing, we've actually had more luck using OCPM to tell us where our high water marks are (in terms of IOPs/latency/etc) and then just do a combination of sysstat and statit commands during the problem periods.  Our most recent case involved gathering lots and lots of perfstats (along with various statit gathers) but the TSE came back and used the statit data to sleuth out what the issue was (long running raid-scrubs in that case).

 

Hope that helps - if you've got some specific performance issue examples you can provide maybe that would help folks give feedback on where to look (based on similar experiences).

 

Regards,

 

Chris

ADVUNIMG2
7,077 Views
Public