Subscribe

volume maxdirsize

Hi Everyone , 

   I'm a little bit confused the filer is prompting that maxdirsize is approaching its maxdirsize limit for volume image but when i check some commands it does not approaching. What is the proper way to check if the maxdirsize is approaching its limit.

 

 Does it have an impact when increasing it or Does the performance affects when hitting the limit. 

 NetApp> maxfiles
      Volume image: maximum number of files is currently 31876689 (1156105 used)

 

NetApp> df -i
Filesystem           iused       ifree    %iused   Mounted on
     /vol/image/ 1156105 30720584   4%     /vol/image/

 

image online raid_dp, flex nosnap=off, nosnapdir=off, minra=off,
sis no_atime_update=off, nvfail=off,
64-bit ignore_inconsistent=off, snapmirrored=off,
create_ucode=on, convert_ucode=on,
maxdirsize=45875, schedsnapname=ordinal,
fs_size_fixed=off, guarantee=none,
svo_enable=off, svo_checksum=off,
svo_allow_rman=off, svo_reject_errors=off,
no_i2p=off, fractional_reserve=0, extent=off,
try_first=volume_grow, read_realloc=off,
snapshot_clone_dependency=off,
dlog_hole_reserve=off, nbu_archival_snap=off

 

Thanks,

Scott

 

 

Re: volume maxdirsize

Hi,

 

Hope this KB will help you https://kb.netapp.com/support/index?page=content&id=3011562

 

let me know if you have any more questions

 

thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

Re: volume maxdirsize

Don't get inodes for a total volume and maxdirsize confused.  Inodes is important on the dirsize... the article linked above is a good article..

 

But we've increased maxdirsize on some volumes without issue.  It also depends on type of system and memory as to what your default maxdirsize is.  Also, if you snapmirrored a volume from a smaller to a larger unit, (i.e. 2240 - 8040) it will inherit the lower limit of the 2240.  

Re: volume maxdirsize

Hi . What's the indication or is there a figure to show if maxdirsize is approaching its limit? thanks.

Re: volume maxdirsize

Hi . What's the indication or is there a figure to show if maxdirsize is approaching its limit? Not just a prompt message?
thanks.