Subscribe

vscan connection-status after a giveback

Hi all...

 

I have a annoynig status display for "vserver vscan connection-status show-not-connected" command.

 

Past July 07/21 we have made a takeover - giveback operation from NODEFAS01_N1 to NODEFAS01_N2 because we need to change a dimm module on NODEFAS01_N1.

 

Takeover and giveback works fine, but from the moment of the giveback operation, "vscan connection-status" show disconnected  lifs for the antivirus lifs that were migrated to the NODEFAS01_N2  from NODEFAS01_N1 node.

 

These lifs are in its home port correctly after giveback operation.

 

Lets see if I can explain with cdot commands...

 

 

Status ok  for vscan service on NODEFASCL

We have three vservers, vserver_A1, vserver_E1 and vserver_O1

Each vserver has four vscan connections to four vscan servers.

These vserver has his home node on NODEFA01_N1:



NODEFASCL::*> vserver vscan connection-status show-connected -fields connected-since


node         vserver server        connected-since
------------ ------- ------------- ------------------
NODEFAS01_N1 vserver_A1 172.18.16.16 8/14/2016 11:10:25
NODEFAS01_N1 vserver_A1 172.18.16.23 8/14/2016 11:10:41
NODEFAS01_N1 vserver_A1 172.18.16.30 8/14/2016 11:10:30
NODEFAS01_N1 vserver_A1 172.18.16.31 8/14/2016 11:10:30


NODEFAS01_N1 vserver_E1 172.18.16.16 7/21/2016 22:02:32
NODEFAS01_N1 vserver_E1 172.18.16.23 7/23/2016 05:35:10
NODEFAS01_N1 vserver_E1 172.18.16.30 7/23/2016 05:37:08
NODEFAS01_N1 vserver_E1 172.18.16.31 7/23/2016 05:37:04


NODEFAS01_N1 vserver_O1 172.18.16.16 7/21/2016 22:02:27
NODEFAS01_N1 vserver_O1 172.18.16.23 7/23/2016 05:34:08
NODEFAS01_N1 vserver_O1 172.18.16.30 7/23/2016 05:34:49
NODEFAS01_N1 vserver_O1 172.18.16.31 7/23/2016 05:35:02

 

 

But after giveback, "vscan connection-status show-not-connected" command shows no-data-lif connection errors for this vservers but on the other node NODEFAS01_N2,  this node received lifs config after takeover from NODEFAS01_N1 and now these lifs no longer exists on NODEFAS01_N2 after giveback TO NODEFAS01_N1



NODEFASCL::*> vserver vscan connection-status show-not-connected -disconnect-reason !- -fields disconnected-since,disconnect-reason
node         vserver server        disconnect-reason disconnected-since
------------ ------- ------------- ----------------- ------------------
NODEFAS01_N2 vserver_A1 172.18.16.16 no-data-lif      7/21/2016 22:01:15
NODEFAS01_N2 vserver_A1 172.18.16.23 no-data-lif      7/21/2016 22:01:14
NODEFAS01_N2 vserver_A1 172.18.16.30 no-data-lif      7/21/2016 22:01:14
NODEFAS01_N2 vserver_A1 172.18.16.31 no-data-lif      7/21/2016 22:01:14
NODEFAS01_N2 vserver_E1 172.18.16.16 no-data-lif      7/21/2016 22:01:15
NODEFAS01_N2 vserver_E1 172.18.16.23 no-data-lif      7/21/2016 22:01:15
NODEFAS01_N2 vserver_E1 172.18.16.30 no-data-lif      7/21/2016 22:01:15
NODEFAS01_N2 vserver_E1 172.18.16.31 no-data-lif      7/21/2016 22:01:15
NODEFAS01_N2 vserver_O1 172.18.16.16 no-data-lif      7/21/2016 22:01:15
NODEFAS01_N2 vserver_O1 172.18.16.23 no-data-lif      7/21/2016 22:01:15
NODEFAS01_N2 vserver_O1 172.18.16.30 no-data-lif      7/21/2016 22:01:15
NODEFAS01_N2 vserver_O1 172.18.16.31 no-data-lif      7/21/2016 22:01:15
12 entries were displayed.

 

 

¿What can I do to clear this messages from this command?

 

 

Best regards guys!

Re: vscan connection-status after a giveback

Do you have any vscan LIF's that are at home on N2?  If N2 has no LIF that can connect to the vscan servers, this is normal behavior.