Subscribe

Hot add disks to Live E2760 controller-drive tray

I can find documentation to hot add a new disk tray to a running e-series, but I can't find any documentation describing the procedure to (hot?) add a number of individual disks to a live e-series disk tray that isn't fully populated.

 

Is it similar to the "replace a disk" procedure but without doing anything related to pulling out a disk first?

 

Thanks,

Jason

 

Re: Hot add disks to Live E2760 controller-drive tray

[ Edited ]

Hi

 

Please refer https://library.netapp.com/ecm/ecm_download_file/ECMLP2526650 page 123 to add disk shelf.

To add only the drives to an existing shelf refer to step 10 in the same procedure

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.