Subscribe

Disk replacement

[ Edited ]

hi all , 

 

recently i have failed disk on Netapp FAS3170 and after replace the diks again i have recveived failed notification on the same disk any idea ?

 

Thanks 

Re: Disk replacement

Hi,

 

To resolve the issue try taking the Hot Spare Disk out, i.e, pull out that disk and then re-insert/re-seat the disk.

Alternatively set the Filer to Priv Set advanced mode and manually unfail the disk, then try and zero the spare again. if the disk fails again, then it is more than likely at the end of its service life and you will need to get another Hot Spare replacement.

 

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.