ONTAP Hardware
ONTAP Hardware
Solved! See The Solution
Hi,
Thank you for your fast reply.
The problem is that i cannot see anything on console.
Thanks
Yes, i use proper console port ( nor RLM or LAN) with above mentioned settings.
First with Cisco cable and then i make one home made following this:
https://kb.netapp.com/support/index?page=content&id=1010411&pmv=print&impressions=false
Also i tried to reinstall Data ONTAP according this tutorial:
https://library.netapp.com/ecm/ecm_download_file/ECMP1116959
With both versions provided for this device from oficial site: Data ONTAP 7.3.3 & Data ONTAP 7.3.7, but againg i don't see any characters on serial. Also i tried without CF card ... i think there should be some kind of warning message "No CF card or No operatin system" but again nothing.
Console connection was tried from Windows,Linux and MacOS boxes. All devices are tested on Cisco swith and i'm able to connect ot it without any problems.
Thanks,