2017-03-17 06:26 PM
I have a FAS808EX (OnTap 8.3.2p4) configured as a FlexArray only. No local attached disk shelves. The OS boots off another array lun on each node. 1 aggregate is configured on each node with array luns on the same array.
All is running well except OCUM 7 is reporting a warning on both nodes: Disk Shelf Multipath Not Configured. Being that there are no local disk shelves, is this something that can be turned off? The only way to get it to go away on OCUM 7 is to turn off the multipath alerts globally which I don't want to do because I have other nodes on this same cluster and other clusters.
Here's the alert from OCUM:
Solved! SEE THE SOLUTION
2017-03-27 11:56 AM - edited 2017-03-27 11:57 AM
After contacting support, this issue is due to an OS bug. Bug ID 927715
Although the system is healthy, per their response: "There is no fix until 9.2 OS is released, till then you need to keep ignoring these alerts."
4 weeks ago
I have not seen it listed in the fixes included in 9.2 and I haven't brought those Flex Array FAS8080 nodes up to that level yet to check if it was resolved. Going to let 9.2 vet itself out a little longer.
I did however check all of the 9.1 patches and bug fixes and they don't have anything that looks related:
There's nothing mentiond here:
There's also no further mention of it here:
If anyone else knows please let us know.