Subscribe

Init failed disks

Hi There,

I see sometimes the disks becomes init failed and goes to broken pool. So my question is how to get back the init failed disks back to spare pool?

Cheers,

Srikanth

Re: Init failed disks

You should go to the maintenance menu (second CTRL+C after system power up) and run the command 'disk unfail all'.

Before that you need to run a command 'raid_config' with 'deletefdr' option but I don't remember exact command spell. You should see available options when running raid_config.

Re: Init failed disks

Thanks, and what about disks in "not responding" state? Is there a way to get them back?

Re: Init failed disks

What should I do if I had such situation - reinsert them and if problem persists contact support.

Re: Init failed disks

Thanks