Subscribe
Accepted Solution

Maximum aggr size

[ Edited ]

Whats the Maximum aggr size in 32-bit in FAS 2020

Re: Maximum aggr size

Hi,

 

Configuration maximums are based on controller model + ONTAP version. What version of dataONTAP is your controller running?

 

/matt

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

Re: Maximum aggr size

Hi,

 

FAS2020's maximum aggregate size is limited to (8TB). This limit is enforced by Data ONTAP 7.2.4L1, which restricts creation or expansion of an aggregate that is greater than (8TB) on FAS2020 systems.
Although the FAS2020 can effectively manage, address, and provide access to aggregates up to 16TB, the successful execution of WAFL recovery tools requires that FAS2020 aggregates be (8TB) or less.  

 

For further more details refer KB article, https://kb.netapp.com/support/index?page=content&id=3012390&actp=search&viewlocale=en_US&searchid=1426744936085

 

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.