Subscribe

May I login via SSH to BMC in FAS2020?

[ Edited ]

We've a FAS2020 used for years.

But now a question arise - is it possible to login to bmc via ssh?

bmc status tells me next:

Baseboard Management Controller:
Firmware Version: 1.3
IPMI version: 2.0
DHCP: off
BMC MAC address: 00:a0:98:25:62:1a
IP address: 10.10.13.21
IP mask: 255.255.255.0
Gateway IP address: 10.10.13.254
BMC ARP interval: 10 seconds
BMC has (1) user: naroot

When I want to login via ssh i got:

ssh naroot@10.10.13.21
Received disconnect from 10.10.13.21: 11: Logged out.
Disconnected from 10.10.13.21

 

Re: May I login via SSH to BMC in FAS2020?

[ Edited ]

Yes to ssh.  bmc reboot and it likely will work.  Or bmc setup and reset it again.

Re: May I login via SSH to BMC in FAS2020?

[ Edited ]

I've found that the deal is in ssh cllient.

Tries to login from Mac or Linux still without luck, but login from PuTTY (winapp) - is ok!

Suppose this is kind of incompatibility between ssh-keys or setup of ssh daemon "Mocana" in bmc.

$ telnet 10.10.13.21 22
Trying 10.10.13.21...
Connected to 10.10.13.21.
Escape character is '^]'.
SSH-2.0-Mocana SSH

Will try to discover more...

Re: May I login via SSH to BMC in FAS2020?

From a MAC try:

ssh naroot@##.##.##.## -c aes128-cbc

You have to change the MAC client default cipher to work with a BMC