ONTAP Hardware

Netapp FAS2552 FCoE Nexus (non vPC)

Vinokurov_EA
2,553 Views

I did not find any VLAN settings in the FCoE port settings of SVM. Although Cisco switches require a trunk for FCoE.

How can I specify a VLAN on the netapp port?

1 ACCEPTED SOLUTION

andris
2,479 Views

On the NetApp Support Site, if you search for configure vlan interface port ontap 9,  one of the first hits is this page from the ONTAP 9.0 Network Management guide:

Configuring VLANs over physical ports

 

View solution in original post

1 REPLY 1

andris
2,480 Views

On the NetApp Support Site, if you search for configure vlan interface port ontap 9,  one of the first hits is this page from the ONTAP 9.0 Network Management guide:

Configuring VLANs over physical ports

 

Public