Dears I am totally new to netapp. We have a netapp 2040 FAS with 12 hard disks. For some reason when this was configured they didnt configure the spare disks. So we are with a netapp with 12 disk without a spare disk. Can any one suggest a rebuild option so that I can configure atleast 1 spare disk.
sysconfig
NetApp Release 8.1 7-Mode: Thu Mar 29 13:54:17 PDT 2012
System ID: 0142269140 (STORAGE)
System Serial Number: xxxxxxxxxxx (STORAGE)
System Rev: C1
System Storage Configuration: Single Path
System ACP Connectivity: NA
slot 0: System Board
Processors: 2
Processor type: Intel(R) Xeon(R) CPU @ 1.66
GHz
Memory Size: 4096 MB
DISK OWNER POOL SERIAL NUMBER HOME
------------ ------------- ----- ------------- -----------
--
0c.00.2 STORAGE (142269140) Pool0 Z1N1GYCX STORAGE (14
2269140)
0c.00.3 STORAGE (142269140) Pool0 Z1N1H0MV STORAGE (14
2269140)
0c.00.1 STORAGE (142269140) FAILED Z1N1G5TL STORAGE (14
2269140)
0c.00.4 STORAGE (142269140) Pool0 Z1N1GZDY STORAGE (14
2269140)
0c.00.6 STORAGE (142269140) Pool0 Z1N1GZVV STORAGE (14
2269140)
0c.00.8 STORAGE (142269140) Pool0 Z1N1GX1Z STORAGE (14
2269140)
0c.00.7 STORAGE (142269140) Pool0 Z1N1GZZ6 STORAGE (14
2269140)
0c.00.5 STORAGE (142269140) Pool0 Z1N1GWBG STORAGE (14
2269140)
0c.00.11 STORAGE (142269140) Pool0 Z1N1H0CG STORAGE (14
2269140)
0c.00.10 STORAGE (142269140) Pool0 Z1N1GXDR STORAGE (14
2269140)
0c.00.0 STORAGE (142269140) Pool0 MS1VZ5ZF STORAGE (14
2269140)
aggr status
Aggr State Status Options
aggr1 online raid_dp, aggr
64-bit
aggr0 online raid_dp, aggr root
reconstruct
degraded
64-bit
We had 2 hard disk failure and I have just added one hard disk now. So it started to rebuild. I was wondering if we can just rebuild the whole netapp? please advice