Subscribe
Accepted Solution

Replaced disk from FAS2020 into FAS2040+DS4243, now what?

Good day.  Let me start by stating I do not want to save data.  This is starting from scratch.

I have moved 12 drives from a FAS2020 into a DS4243 that is ran from a FAS2040.  I thought that the drives from the 2020 were zeroed out but I was mistaken.  I can see the drives in the CLI of both controllers on 2040.  I do not see the drives if I run DISK SHOW or DISK SHOW -N.   I do see them listed when I run DISK SHOW -A (see below) but they are still listing the old 2020 filer name (sv-storage-1b or 2b).  I was not able to remove ownership because   “disk remove_ownership: Disk 0d.01.4 does not exist”. Any way to get these drives to work in the 4243 with out having to go back to the 2020 to zero out the drives? This is a repurposed design for a disk-to-disk backup solution I am working on.  Thanks!

The 0c.00.xx is the FAS 2040 disks (active/active 3 drives per controller)

The 0d.01.xx is the DS4243 with the newly added 1TB SATA drives (replaces 300GB SAS)

sv-storage-1a> disk show -a

  DISK OWNER                  POOL   SERIAL NUMBER

------------ -------------          -----  -------------

0c.00.2      sv-storage-1a((***)   )   Pool0  WD-(***)

0c.00.0      sv-storage-1a((***)   ) Pool0  WD-(***)  

0c.00.1      sv-storage-1a((***)   ) Pool0  WD-(***)  

0c.00.11     sv-storage-2a((***)   ) Pool0  WD-(***)  

0c.00.9      sv-storage-2a((***)   ) Pool0  (***)  

0c.00.10     sv-storage-2a((***)   ) Pool0  (***)  

0d.01.4      sv-storage-2b((***)   ) Pool0  (***)  

0d.01.1      sv-storage-1b((***)   ) Pool0  (***)  

0d.01.0      sv-storage-2b((***)   ) Pool0  (***)  

0d.01.7      sv-storage-1b((***)   ) Pool0  (***)  

0d.01.5      sv-storage-1b((***)   ) Pool0  (***)  

0d.01.3      sv-storage-1b((***)   ) Pool0  (***)  

0d.01.2      sv-storage-2b((***)   ) Pool0  (***)  

0d.01.10     sv-storage-2b((***)   ) Pool0  (***)  

0d.01.8      sv-storage-2b((***)   ) Pool0  (***)  

0d.01.6      sv-storage-2b((***)   ) Pool0  (***)  

0d.01.9      sv-storage-1b((***)   ) Pool0  (***)  

0d.01.11     sv-storage-1b((***)   ) Pool0  (***)  

Re: Replaced disk from FAS2020 into FAS2040+DS4243, now what?

Hi,

This is related to disk ownership, first you have to remove the ownership at older controller then only you can add those disk drives to new controller. Fine now you no need to go back to older controller to do all this. Use the following command:

"disk assign disk_name -s system_id -f"

ex:

disk assign 0d.01.11 -s 1903120345 -f

Re: Replaced disk from FAS2020 into FAS2040+DS4243, now what?

disk remove_ownership isn't available in priv set mode?

if you run  storage show

does sanown not enabled show at the bottom of the system?  if it does, you don't have software disk ownership enabled. 

Re: Replaced disk from FAS2020 into FAS2040+DS4243, now what?

Phani2,

To be clear, you are saying I need to remove these drives and bring them back to the FAS2020 and remove disk ownership there?  Isn't there anyway I can do that on the 2040?  What if the 2020 was dead?  Again, I do not want to save data on these drives.  I just want to reuse them.  Also since the 2020 was setup with two controllers and had the aggr setup on 6 drives per controller, would I even be able to remove ownership?  Would this need to be done in maintance mode and would it let me do this if there is a aggr or vol on the drives?

I ask all these questions because there brackets are not the same for the 2020 and the ds4243 and that means a lot of screws to deal with

Thanks in advance!

Re: Replaced disk from FAS2020 into FAS2040+DS4243, now what?

jgshntap,

Below is the output of the storage show.  To clarify, remove_ownership is available in priv advanced mode but it errors out with “disk remove_ownership: Disk 0d.01.4 does not exist”

sv-storage-2a*> storage show

Slot:            0a

Description:     Fibre Channel Host Adapter 0a (QLogic 2432 rev. 2)

Firmware Rev:    4.5.2

FC Node Name:    5:00a:0

FC Packet Size:  2048

Link Data Rate:  1 Gbit

SRAM Parity:     Yes

External GBIC:   No

State:           Disabled

In Use:          No

Redundant:       Yes

Slot:            0b

Description:     Fibre Channel Host Adapter 0b (QLogic 2432 rev. 2)

Firmware Rev:    4.5.2

FC Node Name:    5:00a:098

FC Packet Size:  2048

Link Data Rate:  1 Gbit

SRAM Parity:     Yes

External GBIC:   No

State:           Disabled

In Use:          No

Redundant:       Yes

Slot:            0c

Description:     SAS Host Adapter 0c (LSI Logic 1068E rev. B3)

Firmware Rev:    1.31.02.00

Base WWN:        5:00a

State:           Enabled

In Use:          Yes

Redundant:       No

Phy State:       [0] Enabled, 3.0Gb/s (9)

                 [1] Enabled, 3.0Gb/s (9)

                 [2] Enabled, 3.0Gb/s (9)

                 [3] Enabled, 3.0Gb/s (9)

Slot:            0d

Description:     SAS Host Adapter 0d (LSI Logic 1068E rev. B3)

Firmware Rev:    1.31.02.00

Base WWN:        5:00a0

State:           Enabled

In Use:          No

Redundant:       Yes

Phy State:       [0] Enabled, 3.0Gb/s (9)

                 [1] Enabled, 3.0Gb/s (9)

                 [2] Enabled, 3.0Gb/s (9)

                 [3] Enabled, 3.0Gb/s (9)

Slot:            0e

Description:     IDE Host Adapter 0e

No hubs found.

Shelf name:    PARTNER.shelf0

Channel:       PARTNER

Module:        A

Shelf id:      0

Shelf UID:     50:0c

Shelf S/N:     N/A

Term switch:   N/A

Shelf state:   ONLINE

Module state:  OK

               Partial Path   Link    Invalid   Running     Loss    Phy       CRC     Phy

Disk    Port   Timeout        Rate     DWord    Disparity   Dword   Reset     Error   Change

Id     State   Value (ms)    (Gb/s)    Count    Count       Count   Problem   Count   Count

--------------------------------------------------------------------------------------------

[IN0 ] OK             7        3.0        0           0       0        0         0       2

[IN1 ] OK             7        3.0        0           0       0        0         0       2

[IN2 ] OK             7        3.0        0           0       0        0         0       2

[IN3 ] OK             7        3.0        0           0       0        0         0       2

[OUT0] UNUSED         0         NA        0           0       0        0         0       1

[OUT1] UNUSED         0         NA        0           0       0        0         0       1

[OUT2] UNUSED         0         NA        0           0       0        0         0       1

[OUT3] UNUSED         0         NA        0           0       0        0         0       1

[  0 ] OK             7        3.0        0           0       0        0         0       6

[  1 ] OK             7        3.0        0           0       0        0         0       8

[  2 ] OK             7        3.0        0           0       0        0         0       6

[  3 ] EMPTY          0         NA        0           0       0        0         0       0

[  4 ] EMPTY          0         NA        0           0       0        0         0       0

[  5 ] EMPTY          0         NA        0           0       0        0         0       0

[  6 ] EMPTY          0         NA        0           0       0        0         0       0

[  7 ] EMPTY          0         NA        0           0       0        0         0       0

[  8 ] EMPTY          0         NA        0           0       0        0         0       0

[  9 ] OK             7        3.0        0           0       0        0         0       6

[ 10 ] OK             7        3.0        0           0       0        0         0      16

[ 11 ] OK             7        3.0        0           0       0        0         0       6

Shelf name:    0c.shelf0

Channel:       0c

Module:        B

Shelf id:      0

Shelf UID:     50:0

Shelf S/N:     N/A

Term switch:   N/A

Shelf state:   ONLINE

Module state:  OK

               Partial Path   Link    Invalid   Running     Loss    Phy       CRC     Phy

Disk    Port   Timeout        Rate     DWord    Disparity   Dword   Reset     Error   Change

Id     State   Value (ms)    (Gb/s)    Count    Count       Count   Problem   Count   Count

--------------------------------------------------------------------------------------------

[IN0 ] OK             7        3.0        0           0       0        0         0       2

[IN1 ] OK             7        3.0        0           0       0        0         0       2

[IN2 ] OK             7        3.0        0           0       0        0         0       2

[IN3 ] OK             7        3.0        0           0       0        0         0       2

[OUT0] UNUSED         0         NA        0           0       0        0         0       1

[OUT1] UNUSED         0         NA        0           0       0        0         0       1

[OUT2] UNUSED         0         NA        0           0       0        0         0       1

[OUT3] UNUSED         0         NA        0           0       0        0         0       1

[  0 ] OK             7        3.0        0           0       0        0         0       6

[  1 ] OK             7        3.0        0           0       0        0         0       9

[  2 ] OK             7        3.0        0           0       0        0         0       7

[  3 ] EMPTY          0         NA        0           0       0        0         0       0

[  4 ] EMPTY          0         NA        0           0       0        0         0       0

[  5 ] EMPTY          0         NA        0           0       0        0         0       0

[  6 ] EMPTY          0         NA        0           0       0        0         0       0

[  7 ] EMPTY          0         NA        0           0       0        0         0       0

[  8 ] EMPTY          0         NA        0           0       0        0         0       0

[  9 ] OK             7        3.0        0           0       0        0         0       7

[ 10 ] OK             7        3.0        0           0       0        0         0      17

[ 11 ] OK             7        3.0        0           0       0        0         0       7

Shelf name:    PARTNER.shelf1

Channel:       PARTNER

Module:        A

Shelf id:      1

Shelf UID:     50:

Shelf S/N:    

Term switch:   N/A

Shelf state:   ONLINE

Module state:  OK

               Partial Path   Link    Invalid   Running     Loss    Phy       CRC     Phy

Disk    Port   Timeout        Rate     DWord    Disparity   Dword   Reset     Error   Change

Id     State   Value (ms)    (Gb/s)    Count    Count       Count   Problem   Count   Count

--------------------------------------------------------------------------------------------

[SQR0] OK             7        3.0        0           0       0        0         0       1

[SQR1] OK             7        3.0        0           0       0        0         0       1

[SQR2] OK             7        3.0        0           0       0        0         0       1

[SQR3] OK             7        3.0        0           0       0        0         0       1

[CIR4] EMPTY          7         NA        0           0       0        0         0       0

[CIR5] EMPTY          7         NA        0           0       0        0         0       0

[CIR6] EMPTY          7         NA        0           0       0        0         0       0

[CIR7] EMPTY          7         NA        0           0       0        0         0       0

[  0 ] OK             7        3.0        0           0       0        0         0       7

[  1 ] OK             7        3.0        0           0       0        0         0       4

[  2 ] OK             7        3.0        0           0       0        0         0       6

[  3 ] OK             7        3.0        0           0       0        0         0       6

[  4 ] OK             7        3.0        0           0       0        0         0       4

[  5 ] OK             7        3.0        0           0       0        0         0       4

[  6 ] OK             7        3.0        0           0       0        0         0       4

[  7 ] OK             7        3.0        0           0       0        0         0       4

[  8 ] OK             7        3.0        0           0       0        0         0       4

[  9 ] OK             7        3.0        0           0       0        0         0       4

[ 10 ] OK             7        3.0        0           0       0        0         0       4

[ 11 ] OK             7        3.0        0           0       0        0         0       4

[ 12 ] EMPTY          7         NA        0           0       0        0         0       0

[ 13 ] EMPTY          7         NA        0           0       0        0         0       0

[ 14 ] EMPTY          7         NA        0           0       0        0         0       0

[ 15 ] EMPTY          7         NA        0           0       0        0         0       0

[ 16 ] EMPTY          7         NA        0           0       0        0         0       0

[ 17 ] EMPTY          7         NA        0           0       0        0         0       0

[ 18 ] EMPTY          7         NA        0           0       0        0         0       0

[ 19 ] EMPTY          7         NA        0           0       0        0         0       0

[ 20 ] EMPTY          7         NA        0           0       0        0         0       0

[ 21 ] EMPTY          7         NA        0           0       0        0         0       0

[ 22 ] EMPTY          7         NA        0           0       0        0         0       0

[ 23 ] EMPTY          7         NA        0           0       0        0         0       0

[SIL0] DIS/UNUSD      7         NA        0           0       0        0         0       0

[SIL1] DIS/UNUSD      7         NA        0           0       0        0         0       0

[SIL2] DIS/UNUSD      7         NA        0           0       0        0         0       0

[SIL3] DIS/UNUSD      7         NA        0           0       0        0         0       0

Shelf name:    0d.shelf1

Channel:       0d

Module:        B

Shelf id:      1

Shelf UID:     50:

Shelf S/N:    

Term switch:   N/A

Shelf state:   ONLINE

Module state:  OK

               Partial Path   Link    Invalid   Running     Loss    Phy       CRC     Phy

Disk    Port   Timeout        Rate     DWord    Disparity   Dword   Reset     Error   Change

Id     State   Value (ms)    (Gb/s)    Count    Count       Count   Problem   Count   Count

--------------------------------------------------------------------------------------------

[SQR0] EMPTY          7         NA        0           0       0        0         0       0

[SQR1] EMPTY          7         NA        0           0       0        0         0       0

[SQR2] EMPTY          7         NA        0           0       0        0         0       0

[SQR3] EMPTY          7         NA        0           0       0        0         0       0

[CIR4] OK             7        3.0        0           0       0        0         0       1

[CIR5] OK             7        3.0        0           0       0        0         0       1

[CIR6] OK             7        3.0        0           0       0        0         0       1

[CIR7] OK             7        3.0        0           0       0        0         0       1

[  0 ] UNKWN          7         NA        0           0       0        0         0       1

[  1 ] UNKWN          7         NA        0           0       0        0         0       1

[  2 ] UNKWN          7         NA        0           0       0        0         0       1

[  3 ] UNKWN          7         NA        0           0       0        0         0       1

[  4 ] UNKWN          7         NA        0           0       0        0         0       1

[  5 ] UNKWN          7         NA        0           0       0        0         0       1

[  6 ] UNKWN          7         NA        0           0       0        0         0       1

[  7 ] UNKWN          7         NA        0           0       0        0         0       1

[  8 ] UNKWN          7         NA        0           0       0        0         0       1

[  9 ] UNKWN          7         NA        0           0       0        0         0       1

[ 10 ] UNKWN          7         NA        0           0       0        0         0       1

[ 11 ] UNKWN          7         NA        0           0       0        0         0       1

[ 12 ] EMPTY          7         NA        0           0       0        0         0       0

[ 13 ] EMPTY          7         NA        0           0       0        0         0       0

[ 14 ] EMPTY          7         NA        0           0       0        0         0       0

[ 15 ] EMPTY          7         NA        0           0       0        0         0       0

[ 16 ] EMPTY          7         NA        0           0       0        0         0       0

[ 17 ] EMPTY          7         NA        0           0       0        0         0       0

[ 18 ] EMPTY          7         NA        0           0       0        0         0       0

[ 19 ] EMPTY          7         NA        0           0       0        0         0       0

[ 20 ] EMPTY          7         NA        0           0       0        0         0       0

[ 21 ] EMPTY          7         NA        0           0       0        0         0       0

[ 22 ] EMPTY          7         NA        0           0       0        0         0       0

[ 23 ] EMPTY          7         NA        0           0       0        0         0       0

[SIL0] DIS/UNUSD      7         NA        0           0       0        0         0       0

[SIL1] DIS/UNUSD      7         NA        0           0       0        0         0       0

[SIL2] DIS/UNUSD      7         NA        0           0       0        0         0       0

[SIL3] DIS/UNUSD      7         NA        0           0       0        0         0       0

DISK                  SHELF BAY SERIAL           VENDOR   MODEL      REV

--------------------- --------- ---------------- -------- ---------- ----

0c.00.0                 0    0  WD-NETAPP   X282_WSUMM NA00

0c.00.1                 0    1  WD-NETAPP   X282_WSUMM NA00

0c.00.2                 0    2  WD-NETAPP   X282_WSUMM NA00

0c.00.9                 0    9  NETAPP   X282_SMOOS NA02

0c.00.10                0   10  NETAPP   X282_SMOOS NA02

0c.00.11                0   11  WD-NETAPP   X282_WSUMM NA00

SHARED STORAGE HOSTNAME   SYSTEM ID

------------------------- ----------

sv-storage-1a            

sv-storage-2a             (self)

sv-storage-2a*>

sv-storage-2a*>

Re: Replaced disk from FAS2020 into FAS2040+DS4243, now what?

Ok, so you are running software ownership .. this is good.

Did you try to sanatize the drives?

Re: Replaced disk from FAS2020 into FAS2040+DS4243, now what?

I have pulled all but one drive from shelf.  This is what I am getting...

sv-storage-1a*> disk show -a

  DISK       OWNER                  POOL   SERIAL NUMBER

------------ -------------          -----  -------------

0c.00.2      sv-storage-1a()   Pool0  WD-

0c.00.0      sv-storage-1a()   Pool0  WD-

0c.00.1      sv-storage-1a()   Pool0  WD-

0c.00.11     sv-storage-2a()   Pool0  WD-

0c.00.9      sv-storage-2a()   Pool0 

0c.00.10     sv-storage-2a()   Pool0 

0d.01.11     sv-storage-1b()   Pool0 


sv-storage-1a*> disk remove_ownership 0d.01.11

disk remove_ownership: Disk 0d.01.11 is not owned by this node.

sv-storage-1a*> disk sanitize start 0d.01.11

The cluster is currently disabled. The cluster must remain disabled during sanitization. Would you like to continue (y/n)? y

WARNING:  The sanitization process may include a disk format.

If the system is power cycled or rebooted during a disk format

the disk may become unreadable. The process will attempt to

restart the format after 10 minutes.

The time required for the sanitization process may be quite long

depending on the size of the disk and the number of patterns and

cycles specified.

Do you want to continue (y/n)? y

disk start: Couldn't find 0d.01.11.

sv-storage-1a*>

Re: Replaced disk from FAS2020 into FAS2040+DS4243, now what?

So i'm clear, the current cluster is 1a/2a?

And when you put it disk 0d.01.11 it's listed as being owned by a node that doesn't exist?

Re: Replaced disk from FAS2020 into FAS2040+DS4243, now what?

You got it.  (bad naming of the controllers I know)

Cluster 1b is the 2020 that I pulled the drives from that is not connected to any of this any longer.  These 1TB drives are not in sv-storage-1a / sv-storage-2a cluster that has a DS4243 connected with only the 1TB drives that were pulled from the 2020.  No other drives are in the 4243.

0d.01.11     sv-storage-1b()   Pool0

Re: Replaced disk from FAS2020 into FAS2040+DS4243, now what?

How the hell do you post a new questions on this board!?!?!?!?!? My god it should not be this hard!!