Subscribe
Accepted Solution

Vseries panic with Native Disks

i have a fresh brand new vseries 3240 in my lab.

i pulled a shelf of ds14mk2AT from another decomm filer and connected to the vseries.

when booting up the vseries, trying to enter maintenance mode but the vseries panic.

Tue May 22 07:24:01 GMT [fci.adapter.link.online:info]: Fibre Channel adapter 3d link online.

Tue May 22 07:24:01 GMT [fci.adapter.link.online:info]: Fibre Channel adapter 0c link online.

Tue May 22 07:24:07 GMT [fci.initialization.failed:error]: Initialization failed on Fibre Channel adapter 3a.

Tue May 22 07:24:07 GMT [fci.initialization.failed:error]: Initialization failed on Fibre Channel adapter 3b.

Tue May 22 07:24:07 GMT [fci.initialization.failed:error]: Initialization failed on Fibre Channel adapter 3c.

Tue May 22 07:24:08 GMT [fci.initialization.failed:error]: Initialization failed on Fibre Channel adapter 0d.

PANIC: sanown: received add for already known disk

version: NetApp Release 8.0.3: Thu Mar 29 22:27:55 PDT 2012

cpuid = 0

Uptime: 1m21s

coredump: primary dumper unavailable.

coredump: trying secondary dumper...

no tftp server ip specified

netdump: no targets available to dump

coredump: secondary dumper failed -1.

Logging shutdown event to the SP...

System halting...

cpu_reset called on cpu#0

how can i remove the disk ownership if i can get into maintenance mode? i tried reading the pdf -

V-Series Systems

Implementation Guide for Native Disk Shelves

but nothing in there has what im looking for

thanks

joey

Re: Vseries panic with Native Disks

Hi Joey,

You need to set the "fc-non-array-adapter-list" environment variable when using multipath-ha cabling on FC disk shelves.

From the LOADER> prompt, if using ports 0d and 3c:

LOADER>setenv fc-non-array-adapter-list 0d, 3c

LOADER>boot_ontap

That should take care of it!

- Dan

Re: Vseries panic with Native Disks

that did the trick! thanks Daniel