ONTAP Hardware

config validation for FAS2552, 20x1.2TB SAS+4x400GB SSD using ADP in Active Passive Setup

erpadmin
2,130 Views

I would like assistance with validating that this FAS2552 is properly setup for ADP in Active Passive Setup.  It has one main data aggr w/one spare along with it being in hybrid mode with the 4 SSD disk flash storage pool (one of which is a spare)

 

Attaching config files for

aggr show-spare-disks

aggr show-instance

disk show

 

Please let me know if I should provide any additional output

 

0 REPLIES 0
Public