ONTAP Hardware

netapp FAS270 beeping and flashing orange status

PUNKGENIUS
3,740 Views

I have a netapp FAS270 which has an amber light (indicating failure) on drive 00, and status a light blinking amber and status b light solid amber and an audible alarm beeping 1 per second.

I got in through the console and tried booting with boot_primary or boot_ontap, but both fail in a reboot loop:

CFE> boot_primary

Loading: 0xffffffff80001000/21632 0xffffffff80006480/9988542 Entry at 0xffffffff

80001000

Starting program at 0xffffffff80001000

Press CTRL-C for special boot menu

..............................

..................................................
................................................................................
................................................................................
................................................................................
................................................................................
...............

ispfc: Fibre Channel adapter 0c appears to be unattached/disconnected.
       If adapter is in use, check cabling and if connected to disk
       shelves, also check seating of LRC cards.
Sun May 22 17:29:25 GMT [fci.initialization.failed:error]: Initialization failed on Fibre Channel adapter 0c.

NetApp Release 7.0.5: Wed Aug  9 01:06:56 PDT 2006
Copyright (c) 1992-2006 Network Appliance, Inc.
Starting boot on Sun May 22 17:28:56 GMT 2011
Sun May 22 17:29:33 GMT [diskown.isEnabled:info]: software ownership has been enabled for this system
NVLOG: UNKNOWN nvram magic value (0xf04b2a7)

WARNING: nvlog_test: Unexpected nvlog contents.  Will discard contents of nvlog,
USER DATA MAY BE LOST

Sun May 22 17:29:37 GMT [fmmbx_instanceWorke:info]: Disk 0b.18 is a primary mailbox disk
Sun May 22 17:29:37 GMT [fmmbx_instanceWorke:info]: Disk 0b.17 is a primary mailbox disk
Sun May 22 17:29:37 GMT [fmmbx_instanceWorke:info]: normal mailbox instance on primary side
Sun May 22 17:29:38 GMT [raid.assim.rg.missingChild:error]: Aggregate aggr0, rgobj_verify: RAID object 1 has only 1 valid children, expected 11.
Sun May 22 17:29:38 GMT [raid.assim.rg.missingChild:error]: Aggregate aggr0, rgobj_verify: RAID object 0 has only 12 valid children, expected 16.
Sun May 22 17:29:38 GMT [raid.assim.plex.missingChild:error]: Aggregate aggr0, plexobj_verify: Plex 0 only has 0 working RAID groups (2 total) and is being taken offline
Sun May 22 17:29:38 GMT [raid.assim.mirror.noChild:ALERT]: Aggregate aggr0, mirrorobj_verify: No operable plexes found.
Root volume is failed (all disks may not yet be visible).
Rebooting... (ctrl-c to bre

What could be the problem?

1 REPLY 1

dougsiggins
3,740 Views
Public