Community

Subscribe
Highlighted

sas admin

Hi

I notice one of our stacks is reporting a problem with the cable.

Cable attached to SAS port "12d" is functioning in a degraded mode.

looking at sas admin expander. Both shelves show an disabled initatior. Is this something configurable or down to the faulty cable between the 2 shelves?

sasadmin expander 12d.1

WWN 500a09800008d3ff, ID 1, Serial Number '6000024290'

Manufacturer: Vendor 'NETAPP  ', Product 'DS224IOM6       ', Rev '0142', Level 2, Slot A

PHY[ 0/P0:0/T]: 6.0 Gb/s, Initiator 500a098000b25d60

PHY[ 1/P0:1/T]: 6.0 Gb/s, Initiator 500a098000b25d60

PHY[ 2/P0:2/T]: 6.0 Gb/s, Initiator 500a098000b25d60

PHY[ 3/P0:3/T]: Disabled

sasadmin expander 12d.2

WWN 500a09800009d13f, ID 2, Serial Number '6000024628'

Manufacturer: Vendor 'NETAPP  ', Product 'DS224IOM6       ', Rev '0142', Level 1, Slot A

PHY[ 0/P0:0/T]: 6.0 Gb/s, Expander 500a09800008d3ff

PHY[ 1/P0:1/T]: 6.0 Gb/s, Expander 500a09800008d3ff

PHY[ 2/P0:2/T]: 6.0 Gb/s, Expander 500a09800008d3ff

PHY[ 3/P0:3/T]: 6.0 Gb/s, Expander 500a09800008d3ff

PHY[ 4/P1:0/S]: 6.0 Gb/s, Initiator 500a098000ca725c

PHY[ 5/P1:1/S]: Disabled

PHY[ 6/P1:2/S]: 6.0 Gb/s, Initiator 500a098000ca725c

Thanks in advance

Andy

Re: sas admin

Andrew,

I would open a ticket with NetApp support as soon as possible, they have access to commands within sasadmin that can maullaually enable drive bay and available paths within the SAS stack.