2015-04-20 09:42 PM
We are configurating one Flexpod solution.
UCS 6296UP with Fas8020 Ontap 8.3 Direct Attached Storage for NFS
This is the information found
We are create the "appliance ports" but this are in error.
Error: ENM source pinning failed
2015-04-20 10:17 PM
It's going to be hard to troubleshoot with out many details on the configuration. To start with, make sure that the VLAN you have configured on the Appliance port exsits in both the LAN Cloud and Appliance sections.
2015-04-23 03:08 AM
This blog post describes nicely solving the issue, which quite likely is due to VLAN discrepancies:
2015-04-23 12:38 PM
I am test with this configuration but the ports are in fail.
is it necesary some special parameters in NetApp (Ontap:8.3)?
I detec what when I configure with "Set Ethernet Swiching Mode" the port are up but in normal mode "End-Host Mode"they are in fail.
2015-04-28 01:30 AM
Same issue here. Configured the vlans in both (lan cloud and appliances).
Port is in failed mode:
|Additional Info||:||ENM source pinning failed|
2015-05-19 01:07 AM
My error was I not had any server created. When I create a server with vNic in this Vlan the port are turn up in "storage port" mode.
Other question, If Netapp port are in ifgroup in Fabric Interconet with port channel?