Accepted Solution

Get-NaVolSpace returns an error (Data ONTAP 7.3.7 - Toolkit v3.0.0)

Trying to get total, used, avail. for Snapshots (like I can with 'df')


/vol/NJTRDNS02_volT/   80GB   21GB   58GB  27%  /vol/NJTRDNS02_volT/
snap reserve          20GB   30MB   19GB   0%  /vol/NJTRDNS02_volT/..

I have tried most of the Get-NaVol* and Get-NaSnapshot* cmdlets with success. However, the Get-NaVolSpace returns an error each time.

Any suggestions?

Here is what I've tried...

Import-Module DataONTAP

Get-Module DataONTAP

$Cred = Get-Credential domain\userID

$objNaController = Connect-NaController -Name filer1 -Credential $Cred


PS C:\> Get-NaVol -Name NJTRDNS02_volT -Controller $objNaController

Name                      State       TotalSize  Used  Available Dedupe  FilesUsed FilesTotal Aggregate

----                      -----       ---------  ----  --------- ------  --------- ---------- ---------

NJTRDNS02_volT            online        80.0 GB   27%    58.6 GB False          8k         3M aggr1


PS C:\> Get-NaSnapshotReserve -TargetName NJTRDNS02_volT -TargetType volume -Controller $objNaController |FL

Name       : NJTRDNS02_volT

Percentage : 20

Size       : 21474836480


PS C:\> Get-NaSnapshotVolumeSpace -TargetName NJTRDNS02_volT -Controller $objNaController |FL

SizeAvailable : 84345376768


PS C:\> Get-NaSnapshotSchedule -TargetName NJTRDNS02_volT -Controller $objNaController |FL

Volume       : NJTRDNS02_volT

Weeks        : 0

Days         : 2

Hours        : 6

Minutes      : 0

WhichHours   : 8,12,16,20

WhichMinutes :


PS C:\> Get-NaVolSpace -Name NJTRDNS02_volT -Controller $objNaController

Get-NaVolSpace : Unable to find API: volume-space-list-info-iter-start

At line:1 char:1

+ Get-NaVolSpace -Name NJTRDNS02_volT -Controller $objNaController

+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    + CategoryInfo          : InvalidOperation: (filer1:NaController) [Get-NaVolSpace], EAPINOTFOUND

    + FullyQualifiedErrorId : ApiException,DataONTAP.PowerShell.SDK.Cmdlets.Volume.GetNaVolSpace


Dismount-NaController -Name filer1

Remove-Module DataONTAP

Re: Get-NaVolSpace returns an error (Data ONTAP 7.3.7 - Toolkit v3.0.0)

Ok, let's see if I can help out..

First, let's cover the basics

With powershell 3.0 and the latest data ontap, you don't need to load the module everytime. 

Also, once you import the module, i'm not sure why you are running get-module.

Also, once you connect to the controller you don't need to keep trying -controller $controllername,   That's a waste

Also for password, i tend to use prompted value

## Define Global PWD

$password = read-host "Enter Root password" -assecurestring

#$password = ConvertTo-SecureString "*" -AsPlainText -Force

$cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "root",$password

So, let's see you connect to controller

$c  = connect-nacontroller $controllername -cred $cred

Now run something like this

get-navol | ? {$_.raidstatus -notmatch "read-only"} | ? {$_.state -eq "online"} |  ? {$ -ne "vol0"} | Select Name,@{N="Snapshot %";E={ Convertto-formattednumber $_.snapshotpercentreserved percent}},@{N="Snap used";E={ convertto-formattednumber ((get-naefficiency $ datasize "0.0"}}`

,@{N="Total Snap Space";E={ convertto-formattednumber (get-nasnapshotreserve $ datasize "0.0"}}`

,@{N="Snap schedule";E={'{0} Weeks {1} Days, {2} Hours, {3} Minutes' -f  (Get-NaSnapshotSchedule $,  (Get-NaSnapshotSchedule $,(Get-NaSnapshotSchedule $,(Get-NaSnapshotSchedule $}} | ft -autosize

If you want to export it you.  I tend to work in objects so i would have done it even differently, but i figured i would help you out and get started

Re: Get-NaVolSpace returns an error (Data ONTAP 7.3.7 - Toolkit v3.0.0)

Also, if you want to add the volume size and used to it, just try to follow what I did for you

Re: Get-NaVolSpace returns an error (Data ONTAP 7.3.7 - Toolkit v3.0.0)

Thanks for the very quick response.

The purpose of those commands (in my list) was only to show the community that all other NetApp CmdLets are working correctly except for "Get-NaVolSpace".

I wasn't displaying a script, just a bunch of commands that I may run individually, depending on what I am looking for.

Your examples, although valuable,  do not really get to the purpose of my inquiry.

As you can see, I do get the credentials and store in a variable and I do the same with the controller.

However, I can not get the "Get-NaVolSpace" CmdLet to work.

I just upgraded my Toolkit to the latest version (

I am running PowerShell v4

My version of OnTap is 7.3.7

I was just checking with the community to see if anyone else has experienced this problem with "Get-NaVolSpace". If they did or didn't, I'd like to know the versions of everything they are running to see if this is something specific to a version of PowerSheel, OnTap, or the Toolkit.

Thanks again !!!

Re: Get-NaVolSpace returns an error (Data ONTAP 7.3.7 - Toolkit v3.0.0)

The "unable to find API" error indicates that the API the cmdlet is calling is not available on your version of Data ONTAP.  The Get-NaVolSpace cmdlet uses the API volume-space-list-info-iter-start/next/end (you can find this information through Get-NaCommand) which is first available on Data ONTAP 8.2.



Re: Get-NaVolSpace returns an error (Data ONTAP 7.3.7 - Toolkit v3.0.0)

Thanks so much. That is the answer I was looking for.

I guess I will have to upgrade to Data ONTAP 8.2 in order to use this command.

I really appreciated your quick response !!!

Re: Get-NaVolSpace returns an error (Data ONTAP 7.3.7 - Toolkit v3.0.0)

Wow, I read that wrong.. i thought you needed helping putting together something... Well, hope it's useful